Volume 25, Number 1 (7-2006)                   JCME 2006, 25(1): 179-188 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

M. R. Toroghinejad, M. Sayadi and M. M. Moshksar. Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion. JCME. 2006; 25 (1) :179-188
URL: http://jcme.iut.ac.ir/article-1-383-en.html

Abstract:   (1185 Views)
Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated and discussed as a function of extrusion parameters. The microstructure and fracture surface of the products were examined using SEM. The results showed that the composites were fully densified and reinforcement particles were distributed uniformly in the matrix. Presence of Al2O3 and SiC particles increased both strength and microhardness, but decreased the ductility of the composites. Experimental results for hot extrusion of the compacted powder billets also showed that the extrusion pressure was dependent on the ram speed or deformation strain rate.
Full-Text [PDF 609 kb]   (130 Downloads)    
Type of Study: Research | Subject: General
Received: 2014/10/25

Add your comments about this article : Your username or email:
Write the security code in the box

© 2015 All Rights Reserved | Computational Methods in Engineering

Designed & Developed by : Yektaweb

تحت نظارت وف ایرانی آسپا-وف