@article { author = {Akhaveissy, A. H. and Tavanaei Far, H.}, title = {In-plane Failure Analysis of URM Structures Based on Strain Hardening and Softening in the Multilaminate Framework}, journal = {Journal of Computational Methods in Engineering}, volume = {34}, number = {2}, pages = {51-71}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {22287698}, eissn = {24235741}, doi = {10.18869/acadpub.jcme.34.2.51}, abstract = {This paper presents a macro model to predict unreinforced masonry structures in plane behavior. The model is based on the concept of multilaminate theory. In the past, the method has been used to model behavior of soil, disregarding the cohesion and the tensile strength. Regarding its mathematical base, and the possibility of applying in other cases, this method is used to predict the ultimate failur load in URM structures in present study. This model is intrinsically capable of spotting induced anisotropy of brittle material such as concrete, rocks and masonry, develponig as a result of cracking. Here, the yield surface applied, consists an generalized mohr-coulomb yield surface, along with a cap model and a cut-off tensile. Comparing numerical results predicted to be obtained in non-linear analysis of masonry structures unreinforced against lateral load, with the results of ther experimental data shows capability of the model in failure analysis of URM structures.}, keywords = {Unreinforced masonry wall,macro modeling,multilaminate method,induced anisotropy,strain hardening and softening}, title_fa = {تحلیل شکست سازه های بنایی غیرمسلح بر پایه سخت شوندگی و نرم شوندگی کرنشی در چارچوب مدل چند صفحه ای}, abstract_fa = {این مقاله یک مدل ماکرو را برای پیش بینی رفتار درون صفحه سازه های بنایی غیرمسلح ارائه می دهد. مدل مزبور برمبنای مفهوم تئوری چند صفحه ای ارائه می شود. از این روش درگذشته برای مدل سازی رفتار ماسه ها، با صرف نظر از چسبندگی و مقاومت کششی، استفاده شده است. با توجه به پایه ریاضی این روش و امکان گسترش آن در سایر مواد، در تحقیق حاضر این روش بر ای پیش بینی بار شکست در سازه های بنایی غیرمسلح به کار می رود. این مدل قادر است ناهمسانی تحمیلی مصالح شکننده را مانند بتن ، سنگ و مصالح بنایی، که به دلیل ترک خوردن ایجاد می شود، به طور ذاتی در نظر بگیرد. در این راستا سطح تسلیم مورد استفاده شامل سطح تسلیم موهرکلمب تعمیم یافته به همراه کپ فشاری و قطع کننده کششی است. مقایسه پیش بینی های عددی از تحلیل غیرخطی سازه های بنایی غیرمسلح در مقابل باره ا ی جانبی با نتایج به دست آمده از داد ه های آزمایشگاهی توانایی این مدل را در تحلیل شکست سازه های بنایی نشان می دهد.}, keywords_fa = {}, url = {https://jcme.iut.ac.ir/article_3116.html}, eprint = {https://jcme.iut.ac.ir/article_3116_e531906a81b9d6e0d13dae9a80f97fb2.pdf} }