@article { author = {Mohieddin Ghomshei, M. and Namazi, Sh.}, title = {Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM}, journal = {Journal of Computational Methods in Engineering}, volume = {41}, number = {1}, pages = {135-154}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {22287698}, eissn = {24235741}, doi = {10.47176/jcme.41.1.8931}, abstract = {In this article, mechanical buckling analysis of tapered beams having constant width and variable thickness, made of two-dimensional functionally graded materials is studied. The beam is assumed to be made of metal and ceramic, where their volume fractions vary in both longitudinal and thickness directions based on the power law. The beam is generally subjected to combined concentrated and distributed axial loads. The set of governing equations are derived using the Principle of Minimum total Potential Energy (PMPE), and are solved numerically using Differential Quadrature Method (DQM) for clamped-free boundary conditions. Convergence and accuracy of the presented solution are confirmed for both cases of concentrated and distributed axial loads. The effects of different parameters on the critical buckling load of the beam for both load cases are studied including geometrical parameters, gradation indices in longitudinal and thickness directions, and variation of thickness. Also buckling analysis of the beam under a combination of concentrated load and distributed axial loads of linear, quadratic and exponential types are investigated. Numerical results show that the highest values of the critical buckling load belong to the linear distributed load, and the lowest value is owned by exponential load.}, keywords = {Buckling,Distributed load,Tapered beam,Two-dimensional functionally graded materials}, title_fa = {تحلیل کمانش تیر تیموشنکو با مقطع متغیر از جنس تابعی تحت بار محوری گسترده و متمرکز به روش تربیع دیفرانسیل}, abstract_fa = {این مقاله به تحلیل کمانش تیرهای گوه‌ای با پهنای ثابت و ضخامت متغیر و ساخته شده از مواد مدرج تابعی دو بعدی پرداخته است. فرض بر آنست که تیر از ترکیب فلز با سرامیک ساخته شده باشد، بطوریکه کسر حجمی هر یک از آنها در راستای طول تیر و همچنین در راستای ضخامت آن بر اساس توابع توانی تغییر کند. همچنین فرض می‌شود که تیر بطور همزمان تحت اثر نیروهای محوری متمرکز و گسترده قرار دارد. معادلات حاکم و شرایط مرزی با استفاده از اصل انرژی پتانسیل کمینه استخراج گردیده و سپس با استفاده از روش تربیع دیفرانسیلی برای تیری با شرایط مرزی یک سر گیردار حل شده‌اند. پس از تایید همگرایی و صحت تحلیل ارائه شده، تأثیر مشخصات گوناگون بر روی مقدار بار بحرانی تیر در هر دو حالت تیر تحت بار متمرکز و تیر تحت بار گسترده بر واحد طول بررسی شده‌اند که از آن جمله می‌توان به مشخصات هندسی تیر، ایندکس‌های توانی در تغییرات خواص در هر دو راستای طول و ضخامت و همچنین چگونگی تغییرات ضخامت تیر اشاره کرد. تحلیل کمانش تیر در صورت اعمال همزمان بارهای نقطه‌ای و گسترده نیز مورد بررسی قرار گرفته است. در تحلیل کمانش تیر تحت بار گسترده سه الگوی توزیع برای بار در نظر گرفته شده‌اند که شامل توزیع خطی، درجه دو و نمایی است. نتایج این تحقیق نشان می‌دهند که در بین الگوهای بررسی شده برای توزیع بار گسترده بیشترین مقدار بار بحرانی متعلق به توزیع خطی است و کمترین مقدار بار بحرانی متعلق به توزیع نمایی بار است.}, keywords_fa = {کمانش,بار گسترده,تیر گوه‌ای,مواد مدرج تابعی دو بعدی}, url = {https://jcme.iut.ac.ir/article_3235.html}, eprint = {https://jcme.iut.ac.ir/article_3235_d44e92097b06659ff71036187b8c84b2.pdf} }