Volume 23, Issue 2 (1-2005)                   JCME 2005, 23(2): 197-205 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

A. Nasr-Esfahany and M.Heydarzadeh Sohi. Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current. JCME. 2005; 23 (2) :197-205
URL: http://jcme.iut.ac.ir/article-1-327-en.html
Abstract:   (2206 Views)
Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in SEM and results are reported. It has been shown that the thickness of the pulse electrodeposits was almost even. The hardness in the pulse electrodeposits increased by increasing the on-time period and by decreasing the current density. It was also noticed that increasing the on-time period increases the nickel content of the deposit. Pulse electrodposits had fine structure and the structure become finer by reducung the on-time period and pulse frequency. The corrosion dehaviors of the deposits were then investigated. The results showed that the corrosion resistance of the DC electrodeposits improves in their nickel content increases. Pulse electodeposits show the same behavior, but deposits with about 13% nickel show maximum corrosion resistance.
Full-Text [PDF 218 kb]   (1854 Downloads)    
Type of Study: Research | Subject: General
Received: 2014/10/25

Add your comments about this article : Your username or Email:

© 2020 All Rights Reserved | Computational Methods in Engineering

Designed & Developed by : Yektaweb