Volume 38, Issue 1 (8-2019)                   JCME 2019, 38(1): 63-79 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Bazai H, Azari A, Moshtagh M. Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD). JCME. 2019; 38 (1) :63-79
URL: http://jcme.iut.ac.ir/article-1-700-en.html
1- Faculty of Petroleum, Gas and Petrochemical Engineering (FPGPE), Persian Gulf University, Bushehr, Iran.
2- Faculty of Petroleum, Gas and Petrochemical Engineering (FPGPE), Persian Gulf University, Bushehr, Iran. , azari.ahmad@pgu.ac.ir
Abstract:   (2946 Views)
The purpose of this article is the numerical study of flow and heat transfer characteristics of Nanofluids inside a cylindrical microchannel with rectangular, triangular, and circular cross-sections. The size and shape of these sections have a significant impact on the thermal and hydraulic performance of the microchannel heat exchanger. The Nanofluids used in this work include water and De-Ethylene Glycol (DEG) as the base fluids and Al2O3, Cu, SiO2 and CuO as the nanoparticles. To solve the problem and extract the required data, a 3-D simulation was performed for the microchannel using ANSYS FLUENT 15.0 software and the effect of the cross-sectional shape of the fluid flow and the type of nanoparticles on the thermal transfer and fluid flow parameters was studied. From the obtained results, it can be observed that the addition of nanoparticles to the base fluid increases the heat transfer and pressure drop. The results also show that rectangular channels have the best performance among the three geometries examined as its heat transfer coefficient was 19.26% higher than the triangular cross section which had the worst performance.
Full-Text [PDF 1813 kb]   (1240 Downloads)    
Type of Study: Research | Subject: Special
Received: 2017/12/5 | Accepted: 2018/11/17 | Published: 2019/08/15

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Computational Methods in Engineering

Designed & Developed by : Yektaweb