A. Abrishamchi, A Stochastic Optimization Model for Groundwater Management [Volume 13, Issue 1, 1993, Pages 93-111]
A. Abrishamchi and K. Farzamnia, Application of Discriminant Analysis to Estimate Instantaneous Maximum Discharge for Catchments in West of Iran [Volume 19, Issue 2, 2001, Pages 179-190]
A. A. Fakhimi, A New Method for Determination of Critical Slip Surfaces in Earth Slopes [Volume 18, Issue 2, 1999, Pages 97-115]
A. A. Fakhimi, A ComputerProgram for Modeling Large Deformation Nonlinear and Transient problems in Geotechnical Engineering [Volume 19, Issue 1, 2000, Pages 111-125]
A. Afshar, A Stochastic Optimization Model for Groundwater Management [Volume 13, Issue 1, 1993, Pages 93-111]
A. Afshar and M.R. Vaezi, Evaluation of Electrical Breakdown of Anodic Films on Titanium in Phosphate-base Solutions [Volume 22, Issue 2, 2004, Pages 201-213]
A.A. Gharehaghaji, Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2006, Pages 241-251]
A. A. Gharehaghaji and M. Rafimanzelat, Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
A. A. Golafshani, Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2007, Pages 73-91]
A. Ardeshir, Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
A. Arkan, Coordinating Orders in Three-echelon Supply Chain using price adjustment mechanism [Volume 27, Issue 2, 2009, Pages 67-80]
A. A. Rostami, Analytical Determination of the Nusselt Number in the Entrance Region [Volume 5, Issue 1, 1987, Pages 45-81]
A. A. Seifkordi and H. Shirzadi, Mathematical Modeling of Contaminated Soil Bioremediation Bases on Convection Dispersion Phenomena [Volume 21, Issue 1, 2002, Pages 43-56]
A. Bakhshi, Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2007, Pages 73-91]
Abbasi, Hossein Impression of Temperature and Oxide Layer Thickness on the Mechanical Characteristics of Aluminum ultra-thin film [Volume 43, Issue 1, 2024, Pages 103-118]
A. Beheshti, Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition [Volume 26, Issue 2, 2008, Pages 77-86]
A.B. Kabiri Samani, Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2006, Pages 69-86]
Abolghasemi, Mehran An enrichment Technique for the Finite Point Method by Equilibrated Singular Basis Functions for Weak Singularities [Volume 45, Issue 1, 2026, Pages 117-129]
Abouei Ardakan, M. A New Recursive Formulation for the Mixed Redundancy Strategy in Reliability Optimization Problems [Volume 39, Issue 2, 2021, Pages 45-58]
Abouei Ardakan, M. Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
A. Ebrahimi, Near-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver [Volume 24, Issue 2, 2006, Pages 123-135]
A. Eslami, Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
A. Eslami, Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
A. Eslami, Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2008, Pages 17-31]
A. Esmaeeli, Numerical Simulation of Transport Phenomena in Nuclear Cores [Volume 11, Issue 1, 1992, Pages 63-81]
A. Farahbode, Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
A. Fathi, Evaluating Weld Magnification Factor in Welded Tubular Joints Using Artifitial Neural Networks [Volume 26, Issue 2, 2008, Pages 15-29]
A. Fattah and B. Tahmasebi, Kinematics and Dynamics of two Cooperating Robots in Spatial Moving of an Object [Volume 18, Issue 1, 1999, Pages 103-112]
A. F. Nateghi, Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Afshari, Roham Nonlinear Vibrations of Functionally Graded Graphene Reinforced Composite Cylindrical Shells Using the Multiple Scale Method [Volume 44, Issue 1, 2025, Pages 1-19]
Aghaabdollahian, Behnaz Supply chain coordination mechanism with time- based discounts and prepayment ratio for perishable products under budget constraint [Volume 43, Issue 2, 2024, Pages 83-106]
Aghaei, Manizheh Numerical Implementation of a Hyperelastic-Viscoplastic Constitutive Model to Simulate the Mechanical Behaviour of Two Segmented Thermoplastic Elastomer Polymers [Volume 44, Issue 2, 2025, Pages 19-47]
A. Ghanbari, Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2009, Pages 139-148]
A. Gholami and M. Mirzai, Simulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes [Volume 22, Issue 1, 2003, Pages 47-55]
A. Ghorbanpour, Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2008, Pages 1-16]
A. Hagilouy, Fundamentals Design and Set up Radial Inflow Gas Turbine Research Lab [Volume 21, Issue 2, 2003, Pages 61-71]
A.Heidari, Flood Hydrograph Simulation with Uncertainty in Rainfall - Runoff Parameters [Volume 23, Issue 2, 2005, Pages 93-111]
A. Heidary and M. Kyvanfar, Analysis of Aperture Coupled Microstrip Patch Antennas with a Superstrate Using the Space Domain Closed-Form Green`s Functions [Volume 16, Issue 2, 1998, Pages 105-115]
A. Heydari, Study on Reduction of Energy Consumption of Household Refrigerators-Freezers [Volume 16, Issue 2, 1998, Pages 29-38]
Ahmadi, Ehsan Numerical Implementation of a Hyperelastic-Viscoplastic Constitutive Model to Simulate the Mechanical Behaviour of Two Segmented Thermoplastic Elastomer Polymers [Volume 44, Issue 2, 2025, Pages 19-47]
Ahmadi, I. Low Velocity Impact Damage Prediction in Laminated Composite Plates [Volume 38, Issue 1, 2019, Pages 37-62]
Ahmadi, M. Vibration Control of Structures using Vibro-Impact Nonlinear Energy Sinks [Volume 35, Issue 1, 2016, Pages 123-142]
Ahmadi, S. A. Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
A. Hosseini, Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory [Volume 26, Issue 1, 2007, Pages 221-232]
A. H. Shirmohammadi, A Preventive Maintenance Decision Policy Based on Economic-Technical and Applicibility Considerations [Volume 19, Issue 2, 2001, Pages 47-64]
Ail A. Rostami, Numerical Solution of Natural Convection in a Vertical Channel. [Volume 15, Issue 1, 1994, Pages 23-33]
Akbari, J. Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2017, Pages 159-176]
Akbarzadeh, A. Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2017, Pages 113-129]
Akbarzadeh, Saleh Rolling Contact Fatigue Analysis of Bearings in the Presence of Oil Lubrication Considering the Effect of Pitting[Volume 45, Issue 1, 2026, Pages 181-201]
A. Keshavarz and M. Rahnama, Two-Dimensional Boundary-Conforming Orthogonal Grids for External and Internal Flows Using Schwarz-Christoffel Transformation [Volume 16, Issue 1, 1997, Pages 19-29]
A. Keshavarzi and M. J. Kazemzadeh Parsee, Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake [Volume 24, Issue 1, 2005, Pages 213-232]
A. Khaki Sedigh and C. Lucas, On the Predictability of Price Fluctuations in Tehran Stock Exchange A Correlation Dimension Estimation Approach [Volume 18, Issue 1, 1999, Pages 193-200]
Akhavan, Amir Evaluation of Signal Processing and Deep Learning Methods for Inter-Beat Interval Extraction from Ballistocardiography Signals [Volume 44, Issue 2, 2025, Pages 49-61]
Akhaveissy, A. H. In-plane Failure Analysis of URM Structures Based on Strain Hardening and Softening in the Multilaminate Framework [Volume 34, Issue 2, 2016, Pages 51-71]
A. Kianvash, The Effect of Heat Treatment on Microstructure and Magnetic Properties of Nd17Fe76.5B5Cu1.5 Type Sintered Magnets [Volume 15, Issue 2, 1997, Pages 87-93]
A. K. Sedigh and H. Seifi, H&infin Controller Design for Static VAR Compensators in Industrial Networks [Volume 17, Issue 2, 1998, Pages 169-177]
AleAli, N. On the Effect of Thermoelastic Damping in Nonlinear Micro Electro Mechanical Resonators using Differential Quadrature Method [Volume 34, Issue 1, 2015, Pages 1-10]
Ali Pashaee and Nasser Fotouraee, Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Ali R. Khaloo, Investigation of the Behavior of Rubberized Concrete under Uniaxial Compressive Test [Volume 26, Issue 2, 2008, Pages 49-58]
Alizadeh, B. Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2021, Pages 23-44]
Alizadeh, G. Optimal Tuned Mass Damper for Nonlinear Structure under
Different Earthquakes [Volume 34, Issue 1, 2015, Pages 45-62]
Alizadeh, Omid A review of concurrent multiscale methods for the analysis of fine scale discontinuity problems [Volume 42, Issue 2, 2024, Pages 1-49]
Alizadeh and H. R. Momeni, A New Guidance Method for Surface to Surface Ballistic Missiles without Mandatory Engine Cut-Off [Volume 17, Issue 2, 1998, Pages 179-184]
A. Meghdari, Minimizing Amplitude of Oscillation of a Suspended Object during Transport by a Robot [Volume 14, Issue 1, 1994, Pages 57-67]
A. Meghdari, Design Characteristics and Dynamic Modeling of a Cooperative Dual-Arm- Lock Manipulator [Volume 15, Issue 1, 1994, Pages 1-25]
A. Meghdari and F. Fahimi, Modeling a Robot with Flexible Joints and Decoupling its Equations of Motion [Volume 16, Issue 2, 1998, Pages 17-28]
A. Memariani, A Fuzzy Algorithm for the m-Machine, n-Job Flow Shop Sequencing Problem [Volume 17, Issue 1, 1998, Pages 33-41]
Amir, Saeed Buckling analysis of orthotropic rectangular plates with adhesive connection by generalized differential quadrature method [Volume 43, Issue 2, 2024, Pages 29-49]
A. Mireshghi and J. Jamshidi, Design and Implementation of a Reactor Physics Laboratory Simulation Software [Volume 19, Issue 1, 2000, Pages 209-220]
A. M. Kaynia, Dynamic Analysis of Single Piles Under Vertical Loads [Volume 5, Issue 1, 1987, Pages 5-20]
A. M. Kaynia, Dynamic Response of Single Piles Under Lateral Loads and Earthquakes [Volume 6, Issue 1, 1988, Pages 5-26]
A. M. Kaynia, Dynamic Analysis of the Interaction Between Water Waves and Offshore Structures [Volume 7, Issue 1, 1989, Pages 5-28]
A.M. Kaynia, Dynamic Behaviour of Piers Under Waves and Earthquakes [Volume 6, Issue 1, 1988, Pages 27-51]
A. M. Keynia, Application of the Boundary Element Method to two Dimensional Dynamic Problems of Saturated Porous Media [Volume 14, Issue 1, 1994, Pages 81-116]
A.M. Keynia, Internal Forces in Piles âUnder External Forces and Earthquake in Homogeneous and Nonhomogeneous Mediaâ [Volume 12, Issue 1, 1993, Pages 21-48]
A. M. Malek, Dynamic Behaviour of Piers Under Waves and Earthquakes [Volume 6, Issue 1, 1988, Pages 27-51]
A. M. Momeni, Behavior of Castellated I Beams Encased in Concrete [Volume 24, Issue 1, 2005, Pages 121-134]
A. Monshi, Method of Quantitative Phase Analysis by XRD Without Reference Material [Volume 16, Issue 1, 1997, Pages 41-49]
A. Moshiri, The Solution of Three Dimensional Incompressible Potential Flow Through Rectangular Ducts [Volume 9, Issue 1, 1991, Pages 79-93]
Amoushahi, H. Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
A. Najafi Zadeh, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
A. Najafi- Zadeh, The Effect of Heat Treatment Cycle on Microstructure and Mechanical Properties of Austempered Ductile Iron with Various Copper Contents. [Volume 8, Issue 1, 1990, Pages 31-60]
A. Najafi- Zadeh, Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys [Volume 13, Issue 1, 1993, Pages 63-91]
A. Najafi- Zadeh, Effect of Aluminum on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys [Volume 14, Issue 1, 1994, Pages 19-35]
A. Najafi- Zadeh, Production of an Armor Steel Plate and the Study of its Mechanical and Ballistic Properties [Volume 14, Issue 1, 1994, Pages 37-55]
A. Nasirahmadi, Effect of Strontium Dopant on Electrical Conductivity of Perovskites [Volume 19, Issue 2, 2001, Pages 147-159]
A. N. Mashayekhi and B. Arbabshiriani, Measunig the Level of an Engineering Organizationâs knowledge: A New Method [Volume 21, Issue 2, 2003, Pages 45-60]
A. Nouri, Increasing Cooling Towers Heat Capacity by Flue Gas Introduction [Volume 17, Issue 1, 1998, Pages 143-152]
A. Nouri, Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator [Volume 26, Issue 1, 2007, Pages 209-219]
A. Rahaee, Application of Numerical Methods in the Analysis of Mat Foundations and Limitations of Classical Methods [Volume 12, Issue 1, 1993, Pages 5-19]
A. R. Azimian, Inviscid Compressible Flow in Meridional Plane of an Axial Flow Compressor [Volume 15, Issue 1, 1994, Pages 57-68]
A. R. Azimian, Off-Design Performance Prediction of Jet Engines [Volume 17, Issue 1, 1998, Pages 197-202]
A. R. Azimian, Laminar Flow Analysis in the Channel Bends [Volume 23, Issue 2, 2005, Pages 151-171]
A. R. Azimian, Thermo-economic Analysis of Power Cycles [Volume 24, Issue 1, 2005, Pages 413-424]
A.R. Bagheri and S. Hashemi, Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes [Volume 26, Issue 2, 2008, Pages 33-47]
A. R. Bakhshai, Space Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters [Volume 23, Issue 1, 2004, Pages 15-32]
Arefinia, Z. Optimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method [Volume 38, Issue 2, 2020, Pages 83-95]
A. Rezvani, Thermal Analysis of Tire [Volume 20, Issue 1, 2001, Pages 137-149]
Ariaei, A.R. Vibration of Elastically Connected Multiple Timoshenko Beams under a Moving Six Degrees of Freedom System [Volume 35, Issue 2, 2017, Pages 23-45]
A.R. Khaloo, Ductility Evaluation of Prestressed Concrete Members [Volume 18, Issue 1, 1999, Pages 61-79]
A.R. Khaloo and R. Morshed, Behavior of Concrete Beams Reinforced Steel Plates [Volume 18, Issue 2, 1999, Pages 77-95]
A.R. Khoee and A.M. Kaynia, Application of the Boundary Element Method to Three-Dimensional Dynamic Solution of Fluid-Saturated Porous Media Problems [Volume 14, Issue 1, 1994, Pages 1-15]
A.R. Kiani Rashid and M. A. Golozar, The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons [Volume 22, Issue 2, 2004, Pages 177-188]
A. Rostami, Prediction of Radiation Heat Transfer from Combustion Gases in a Convergent- Divergent Nozzle Using Zoning Method [Volume 11, Issue 1, 1992, Pages 83-104]
A. R. Pishevar and A. R. Shateri, A New Implicit Dissipation Term for Solving 3D Euler Equations on Unstructured Grids by GMRES+LU-SGS Scheme [Volume 24, Issue 1, 2005, Pages 233-249]
A. R. Safari, Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
Arzani, H. Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2019, Pages 79-96]
A. Saatchi, The Effect of Current Density on Morphology and Texture of Zinc Electrodeposit on Steel [Volume 20, Issue 1, 2001, Pages 207-217]
A. Saatchi, Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2003, Pages 145-158]
A Saatchi and J.Hejazi, The Effects of Agitation on the Properties of Antifriction Ni-P-MoS2 Composite Coatings [Volume 15, Issue 1, 1994, Pages 35-44]
A. Saatchi and M. A. Golozar, Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits [Volume 23, Issue 2, 2005, Pages 173-184]
A. Saatchi and V. Mortazavi, The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
A. Sabounchi and A. Hajian-nejad, Numerical Analysis of Heat Transfer of Slab in the pusher-Type Preheat Furnaces [Volume 20, Issue 2, 2001, Pages 153-166]
Asadi, Mohammad Impact of Calcified Plaque Material Properties on TAVI Performance: A Finite Element Analysis [Volume 44, Issue 2, 2025, Pages 79-104]
Asadigorji, H. Analysis and Comparison of Nonlinear Dynamic Behavior of Viscoelastic and Elastic Rectangular Plates under Supersonic Aerodynamic Flow [Volume 40, Issue 1, 2021, Pages 125-151]
A. Sadough - Vanini, Metalization of Polymers: Copper on Cyclotene [Volume 22, Issue 1, 2003, Pages 167-174]
A. Said and M.A. Golozar, Combustion Synthesis of Titanium-Tungsten Carbide Composites in Iron Matrix [Volume 18, Issue 1, 1999, Pages 171-180]
A. Saidi, Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
A. Saidi, Study of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying [Volume 26, Issue 1, 2007, Pages 301-311]
A. Saidi, Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2009, Pages 155-164]
A. Sayadian, Using FFI Interpolator and VQ Quantization for Designing of High Quality 1200 BPS Speech Vocoder [Volume 17, Issue 2, 1998, Pages 21-27]
A. Sayadian, Using Exciting and Spectral Envelope Information and Matrix Quantization for Improvement of the Speaker Verification Systems [Volume 18, Issue 1, 1999, Pages 13-22]
A. Sayadiyan, Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2005, Pages 1-10]
Asgaari, E. Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2019, Pages 61-78]
A. Shadaram, A Modified Flux Vector Splitting Scheme for Flow Analysis in Shock Wave Laminar Boundary Layer Interactions [Volume 20, Issue 2, 2001, Pages 167-180]
A. Shafyei and N. J. Welham, Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
A. Shafyei and N.J. Welham, Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2009, Pages 155-164]
A. Shahandeh, Application of Fuzzy Decision-Making to Facility Layout Planning [Volume 27, Issue 2, 2009, Pages 31-47]
A. Shams Nateri, Using the Geometric Model to Explain the Longitudinal and CrossâSectional Reflection Behaviors of Acrylic yarns [Volume 21, Issue 2, 2003, Pages 167-180]
A. Shirvani and M. Farzin, Shear Localization due to Strain Softening in Side Pressed Cylinders [Volume 22, Issue 1, 2003, Pages 175-188]
Ashrafifar, A. Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
A. Tabibi and A. Sadeghi, Estimation of Open-End Cotton Yarn Strenght from Fiber Physical Characteristics [Volume 23, Issue 1, 2004, Pages 203-209]
A. Torkian and P. Khadivi, Optimized Standard Cell Generation for Static CMOS Technology [Volume 21, Issue 2, 2003, Pages 15-27]
A. Vakil and B. Firoozabadi, Effects of Valve Closing Law and Unsteady Friction Model on Damping Pressure Waves in a Network [Volume 26, Issue 1, 2007, Pages 329-338]
A. Vasseghi, Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Ayatollahi, Shahab Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2023, Pages 117-136]
A. Yazdian, Genetic Algorithm- Based Active Power Filter Allocation and Size Determination [Volume 21, Issue 1, 2002, Pages 29-41]
A. Zaery, Increase of Sliding Mode Controller Stability Limit [Volume 25, Issue 2, 2007, Pages 205-212]
Azari, A. Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Azari, A. Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2024, Pages 109-128]
Azhari, A. Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2022, Pages 57-79]
Azhari, M. Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2020, Pages 43-61]
Azhari, Mojtaba A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
Azimi- Sadjadi, Speaker Independent Speech Recognition Using Hidden Markov Models for Persian Isolated Words [Volume 13, Issue 1, 1993, Pages 21-45]
Azizpooryan, M. Static Analysis of in-Plane Heterogeneous Laminated Composite Plates Using Equilibrated Basis Functions Based on FSDT [Volume 40, Issue 1, 2021, Pages 59-77]
B
Babaadam, Niloufar Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2023, Pages 61-82]
Badaghi, D. Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2017, Pages 85-112]
Badnava, Hojjat Modeling Anisotropic Hyperelastic Behavior of Soft Tissues Using the Smoothed Particle Hydrodynamics Method [Volume 44, Issue 1, 2025, Pages 63-83]
Bagheri, M. Fuzzy Structural Reliability Analysis using the Dynamic Directional Stability Transformation Method [Volume 37, Issue 1, 2018, Pages 133-148]
Baghlani, A. Damage Detection in Beam and Rod using Wave Propagation Method with Spectral Finite Elements [Volume 35, Issue 2, 2017, Pages 197-210]
Barati, Morteza An efficient method for applying distributed loads on curved surfaces in isogeometric analysis [Volume 43, Issue 2, 2024, Pages 107-125]
Barghi Jahromi, M. S. The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2022, Pages 109-126]
Barouei, Z. The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2021, Pages 59-72]
Bateniparvar, O. Solution of Harmonic Problems with Weak Singularities Using Equilibrated Basis Functions in Finite Element Method [Volume 39, Issue 2, 2021, Pages 119-146]
Bazai, H. Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Bazdidi Tehrani, F. Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2017, Pages 85-112]
Bazdidi Tehrani, F. Analysis of Particle Dispersion in Turbulent Mixed Convection of CuO-water Nanofluid [Volume 36, Issue 2, 2018, Pages 35-47]
B. Daei, Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
B.Ebrahimian and M.Vafaeian, Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Behbahani-nejad, Morteza Analysis of Large-Scale Heat Conduction Problems Using a Modified Single-Level Fast Multipole Method [Volume 41, Issue 2, 2023, Pages 83-100]
Behnamfar, F. Material and Geometrical Nonlinear Analysis of Structures Using Improved Applied Element Method (IAEM) [Volume 35, Issue 1, 2016, Pages 65-81]
Besharati, Mohammad Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2023, Pages 29-60]
B. Farahanieh and A. R. Davari, An Experimental Study of the Aerodynamic Behavior of the Two Wrap Around Fin Missiles [Volume 21, Issue 1, 2002, Pages 141-152]
B. Farhanieh, Numerical Investigation of Fluid Flow Characteristics Around Slide Gates Using Multi-Zonal Method [Volume 17, Issue 1, 1998, Pages 85-107]
B. Farhanieh and M. Rad, Numerical Investigation of the Structure of Density Currents in a two Dimensional Channel [Volume 18, Issue 2, 1999, Pages 155-169]
B. Firoozabadi, Numerical Investigation of the Structure of Density Currents in a two Dimensional Channel [Volume 18, Issue 2, 1999, Pages 155-169]
B. Ghahreman, Derivation of Intensity -Duration-Frequency -Area(IDFA) Curves for Mashhad City [Volume 17, Issue 2, 1998, Pages 69-81]
B. Ghasemi, Effects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities [Volume 21, Issue 1, 2002, Pages 181-194]
B. Gholizadeh, Representation of a digitized surface by triangular faces [Volume 15, Issue 1, 1994, Pages 1-10]
B. Mirzaeian, A New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control [Volume 20, Issue 1, 2001, Pages 29-42]
B. Mostaghaci, Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite [Volume 27, Issue 2, 2009, Pages 213-226]
Boroomand, Bijan Meshless Local Exponential Basis Functions with Up-To-Desired Continuity Order for Bending of Laminated Composite Plates [Volume 44, Issue 1, 2025, Pages 43-61]
B. Saghafian, The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
B. Saghfian and R. Maknoon, Flood Hydrograph Simulation with Uncertainty in Rainfall - Runoff Parameters [Volume 23, Issue 2, 2005, Pages 93-111]
C
C. Dehghanian, Determination of Tafel Constants from Polarization Curves and Calculation of Steel Corrosion in High Electrical Resistivity Media such as Concrete [Volume 6, Issue 1, 1988, Pages 53-71]
C. Dehghanian, Evaluation of Polybutadiene Coating on Steel with AC- Impedance Technique [Volume 6, Issue 1, 1988, Pages 73-77]
Chahkoutahi, F. Electricity Load Forecasting by Combining Adaptive Neuro-fuzzy Inference System and Seasonal Auto-Regressive Integrated Moving Average [Volume 38, Issue 1, 2019, Pages 119-129]
Cheraghi, N. Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
C. Kutzner, The Value of Inspection Galleries [Volume 7, Issue 1, 1989, Pages 117-139]
C. Lucas, Speaker Independent Speech Recognition Using Hidden Markov Models for Persian Isolated Words [Volume 13, Issue 1, 1993, Pages 21-45]
D
Darabi, M. Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Davari-Ardakani, H. Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Davoodi, N. Nonlinear Dynamic Analysis of RC Shear Walls using Damage Mechanics Approach Considering Bond-Slip Effects [Volume 34, Issue 1, 2015, Pages 27-44]
D. Derakhshan and G. Karami, A General New Algorithm for Regulaization of Singular Integrals in Three-Dimensional Boundary Elemnts [Volume 17, Issue 1, 1998, Pages 121-132]
Dibaee Bonab, M. H. Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
D. Mostofinejad, Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC) [Volume 20, Issue 1, 2001, Pages 83-95]
D. Mostofinejad, A New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature [Volume 23, Issue 1, 2004, Pages 95-122]
D. Mostofinejad and M.Davoodnabi, Investigation of the Rigidity of Floor Diaphragms on the Behavior of Concrete Tall Buildings with Staggered Shear Walls under Lateral Loading [Volume 21, Issue 1, 2002, Pages 81-100]
D. Mostofinejad and M. Hoseinian, An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2007, Pages 31-49]
D. Mostofinejad and M. Noormohamadi, Effects of Transverse and Longitudinal Steel Ratios and Shear Span on the Behavior of RC Beams under Shear Using Modified Compression Field Theory [Volume 27, Issue 2, 2009, Pages 81-101]
D. Mostofinejad and M. Reisi, Effect of Limestone Powder on Compressive Strength of Concrete Containing Silica Fume and Optimization of Mix Design Using Response Surface Method [Volume 24, Issue 1, 2005, Pages 401-411]
Duester, A. Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
E
Ebrahim Hajidavalloo, Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
Ebrahimi, P. Analysis of the Effect of Fluid Velocity on the Instability of Concrete Pipes Reinforced with Nanoparticles Conveying the Fluid Flow [Volume 38, Issue 2, 2020, Pages 63-81]
Ebrahimnia-Bajestan, E. Comparative Study of Laminar Convective Heat Transfer and Pressure Drop of Nanofluids through Curved Geometries [Volume 36, Issue 1, 2017, Pages 19-37]
Edalati, H. Analysis of Thin Isotropic and Orthotropic Plates with Element-Free Galerkin Method and Various Geometric Shapes [Volume 34, Issue 2, 2016, Pages 143-157]
E. Esmailzadeh, Dynamic Analysis and Stability of Articulated Liquid Cargo Vehicles with Tank Baffles [Volume 20, Issue 1, 2001, Pages 219-232]
E. Esmailzadeh and A. R. Ohadi, Longitudinal and Transversal Vibration Response of Beams by Statistical Energy Analysis (SEA) [Volume 17, Issue 1, 1998, Pages 133-142]
E. Hajidavalloo, Effect of Using Evaporative Condenser Instead of Air Condenser in Window-air Conditioners [Volume 22, Issue 2, 2004, Pages 149-159]
E. Kabir and R. Azmi, A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Emami, Mohsen Numerical simulation of supersonic natural gas flow passing through a Laval nozzle to assess the possibility of Dehumidification [Volume 44, Issue 1, 2025, Pages 85-102]
Emami, Mohsen Numerical Modeling of Radiative Transfer in NETmix Photocatalytic Reactors Using Hamiltonian-Based Ray Tracing in COMSOL [Volume 44, Issue 1, 2025, Pages 103-131]
E. Shasavandi, A Rapid Optimization Method for Slip Surface in Earth Slopes Using Genetic Algorithm [Volume 25, Issue 2, 2007, Pages 93-112]
E. Shirani, Some Aspects of Numerical Studies of Turbulent Flows Using Large Eddy Simulation Technique [Volume 5, Issue 1, 1987, Pages 21-44]
E. Shirani, A Procedure for Design of the Axial Flow Fans [Volume 7, Issue 1, 1989, Pages 29-59]
E. Shirani, Numerical Simulation of Transport Phenomena in Nuclear Cores [Volume 11, Issue 1, 1992, Pages 63-81]
E. Shirani, Evaluation of Roe s Method with Different Limiters in Supersonic 2-D and Axisymmetric Flows [Volume 19, Issue 2, 2001, Pages 111-124]
E. Shirani, Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2007, Pages 131-149]
Eskandarjuy, M. S. Damage Detection in Beam and Rod using Wave Propagation Method with Spectral Finite Elements [Volume 35, Issue 2, 2017, Pages 197-210]
Esmizade, S. The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Esmizadeh, S. Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2021, Pages 97-117]
Ettefagh, M. Reliability Study of Energy Harvesting from Sea Waves by Piezoelectric Patches Consideraing Random JONSWAP Wave Theory [Volume 36, Issue 2, 2018, Pages 21-34]
Ettefagh, M. M. Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
F
Falahati, Mohammad Simulation of Non-Isothermal Flow of Rubber in Banbury Mixer Using Computational Fluid Dynamics [Volume 42, Issue 1, 2023, Pages 43-62]
Fallahi, F. The Effect of Friction on the Nonlinear Vibration of the Cracked One-Stage Power Transmission [Volume 34, Issue 2, 2016, Pages 105-122]
Falsafi, M. Numerical Study of Ferrofluid Forced Convection Heat Transfer in Tube with Magnetic Field [Volume 34, Issue 1, 2015, Pages 11-25]
Farhudi, Alireza Energy-Based Progressive Collapse Assessment of Steel FrameBuildings for Planning Multi-Stage Explosive Demolition[Volume 45, Issue 1, 2026, Pages 73-90]
Farrokhi, M. Buckling of Cracked Panels under Axial Compressive and Tensile Loading [Volume 34, Issue 1, 2015, Pages 155-164]
Farrokhi-Asl, H. Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2017, Pages 65-84]
Farrokhi-Asl, H. A Cyclical Integrated Production and Maintenance Systems Planning with Consideration of Identical Maintenance Periods [Volume 36, Issue 2, 2018, Pages 63-78]
Farrokhi-Asl, H. Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2019, Pages 61-78]
F. Ashrafizadeh, Comparison of Carburizing and Boronizing Processes on Mechanical and Wear Properties of PM Parts [Volume 17, Issue 1, 1998, Pages 177-186]
F. Ashrafizadeh, The Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers [Volume 17, Issue 2, 1998, Pages 155-168]
F. Ashrafizadeh, The production of Ceramic Thin Films by Sol-Gel Method [Volume 22, Issue 2, 2004, Pages 189-200]
F. Ashrafizadeh and A. Ghasemi, Annealing Effects on Microstructure and Microwave Properties of CuO-Doped (Zr0.8Sn0.2)TiO4 [Volume 27, Issue 2, 2009, Pages 199-211]
Fathi, M. Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
Fathi, R. Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
Fattahi, N. Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Fazeli, E. Material and Geometrical Nonlinear Analysis of Structures Using Improved Applied Element Method (IAEM) [Volume 35, Issue 1, 2016, Pages 65-81]
F. Bahadori and A. Tahershamsi, Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
F. Daneshjoo and J. R. Asgari, Nonlinear Analysis of Knee-braced Frames under Earthquake Loadings [Volume 22, Issue 2, 2004, Pages 103-116]
F. Daneshmand, Modified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems [Volume 27, Issue 2, 2009, Pages 103-122]
F. Farhat-Nia and M. Salimi, Application of Modified Slab Method in Asymmetrical Plate Rolling [Volume 24, Issue 2, 2006, Pages 137-158]
F. Farhat-Nia and M. Salimi, Analysis of Rolling Process for Clad Sheet Using the Modified Slab Method [Volume 25, Issue 1, 2006, Pages 121-134]
F.Ghassemi and R.safari, A Novel Algorithm for Digital Distance Relaying [Volume 14, Issue 2, 1996, Pages 43-59]
F. Heidargheitaghi, F. Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2022, Pages 39-56]
F. Hendesi, A New Fast Data Encryption Algorithm (FDE) [Volume 11, Issue 1, 1992, Pages 5-22]
Firouzian-Nejad, A. Control of Nonlinear Vibration in Bi-Stable Composite Plates using Fuzzy Logic [Volume 34, Issue 2, 2016, Pages 123-142]
F. Karimzadeh, Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2008, Pages 59-70]
F. Mokhatab Rafiee, Design of Manufacturing Cells with Two- Phase Model and A Heuristic Algorithm [Volume 21, Issue 1, 2002, Pages 57-69]
F. Mokhatab-Rafiei and M. Moattar Hosaini, The Problem of Scheduling Several Products on A Single Facility with the Simulated Annealing Technique [Volume 17, Issue 2, 1998, Pages 43-56]
F. Momennasab, F. Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2021, Pages 1-21]
F. Naimpour, Design of a Model Based Compensator for Systems With Time Delays [Volume 10, Issue 1, 1991, Pages 61-86]
F. Naimpour, Design of a Model Based Compensator for MIMO Systems with Time Delays and Constrained Inputs [Volume 11, Issue 1, 1992, Pages 45-62]
F. Nateghi, Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2007, Pages 213-221]
F. Nateghi-A and N.A. Hosseinzadeh, Siesmic Assessment og Ductility and Strength Capacities of Low-Rise R. C. Buildings [Volume 20, Issue 2, 2001, Pages 55-75]
F. Nateghi-Alahi and F. Behnamfar, Shake Table Study of Soil-Structure Interaction Effects on Seismic Response of Adjacent Buildings [Volume 22, Issue 2, 2004, Pages 51-71]
F. Nateghi-Elahi, Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
Foroozande, S. Vibration of Elastically Connected Multiple Timoshenko Beams under a Moving Six Degrees of Freedom System [Volume 35, Issue 2, 2017, Pages 23-45]
Forouan, Mohammad Reza Numerical Implementation of a Hyperelastic-Viscoplastic Constitutive Model to Simulate the Mechanical Behaviour of Two Segmented Thermoplastic Elastomer Polymers [Volume 44, Issue 2, 2025, Pages 19-47]
F. Rahimzadeh Rofooei and A. Malakan, Evaluation of TLD Performance in Reducing the Seismic Response of Structures [Volume 19, Issue 1, 2000, Pages 127-142]
F. Rahimzadeh Rofooei and H. Saadatnia, Evaluation of the SEAOC/UBC97 Provisions for the Tall Base-Isolated Structures [Volume 19, Issue 2, 2001, Pages 169-178]
F. Razavi, A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2009, Pages 1-17]
F. Sobhanmanesh, Recognition of Handwritten Persian Numbers and Arithmetic Symbols Using Neural Networks [Volume 12, Issue 1, 1993, Pages 49-71]
F. Torkamani Azar and M. Zanjani, Application of Radon Transform in Detecting Turning Angle of Bodies and in Reading Multi - Lingual Documents [Volume 22, Issue 1, 2003, Pages 31-45]
F. Vahabzadeh and A. Aiwazi, Determination of Kinetic Parameters for Catalytic Isomerization of Glucose to Fructose by immobilized Glucose Isomerase in an Aqueous-Ethanol Medium [Volume 17, Issue 2, 1998, Pages 185-191]
F. Yazdanpanah and A. Vafaei, Design and Implementation of a High Speed Systolic Serial Multiplier and Squarer for Long Unsigned Integer Using VHDL [Volume 26, Issue 2, 2008, Pages 1-14]
G
G. A. Barani, Calculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method [Volume 20, Issue 2, 2001, Pages 207-215]
G.A. Barani, Investigation of Submerged Vanes Array for Sediment Control at Intake Using a Physical Model [Volume 18, Issue 2, 1999, Pages 179-189]
G. Afkhami, Estimation of Open-End Cotton Yarn Strenght from Fiber Physical Characteristics [Volume 23, Issue 1, 2004, Pages 203-209]
Ganjian, Navid A DR-BEM Model for a Half-Space Including the Cavity under Scalar Surface Pulse [Volume 43, Issue 2, 2024, Pages 69-82]
G. Aryanpour, Kinetic Analysis of Molybdenite Oxidation [Volume 11, Issue 1, 1992, Pages 23-43]
G. Aryanpour, Simulstion of Gas Diffusion in Capillaries and Porous Solids [Volume 12, Issue 1, 1993, Pages 73-93]
G. Aryanpour, Authorâs Reply to âA Note on the Simulation of Gas Diffusion in Capillaries and Porous Solidsâ [Volume 14, Issue 1, 1994, Pages 121-124]
G. Askari and S. Gazor, Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2003, Pages 29-44]
Gerami, Ali On the Use of Error Weight Function in the Numerical Solution of Nonlocal Problems Using the Finite Element Method [Volume 44, Issue 2, 2025, Pages 151-165]
G. Ghassem-Sani and M. Namazi, A New Method for Solving Constraint Satisfaction Problems [Volume 23, Issue 1, 2004, Pages 1-13]
Gh, A New Guidance Method for Surface to Surface Ballistic Missiles without Mandatory Engine Cut-Off [Volume 17, Issue 2, 1998, Pages 179-184]
Ghadak, Farhad Parametric Study of the Thrust Augmentor of a Pulsejet Engine in a Low-Mach-Number Compressible Flow Regime Using Unsteady Numerical Simulation [Volume 44, Issue 2, 2025, Pages 189-224]
Ghadiri Rad, mohammad hosein Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2024, Pages 87-108]
Ghadiri Rad, Mohammad Hossein Buckling Analysis of Graphene Platelet-Reinforced Functionally Graded Nanoplates Resting on Elastic Foundation Using a Meshfree Formulation Based on Nonlocal Strain-Gradient Theory[Volume 45, Issue 1, 2026, Pages 25-51]
Ghaei, A. Inverse Design of Airfoil using Elastic Surface Method in Viscous Subsonic and Transonic Flow [Volume 34, Issue 1, 2015, Pages 63-77]
Ghafouri, H. R. A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2020, Pages 1-22]
Gh. A. Montazer, Determination of Relay Switching Time, Evaluation of Disturbance and Noise Effect and Transient Behavior in Robust Binary Control [Volume 18, Issue 2, 1999, Pages 45-59]
Ghasemi, Ahmad Reza Study of the Free Vibration of Joined Hybrid Cylindrical-Conical Shells with the Generalized Differential Quadrature Method [Volume 42, Issue 1, 2023, Pages 89-103]
Ghasemi, Ahmad Reza Buckling analysis of orthotropic rectangular plates with adhesive connection by generalized differential quadrature method [Volume 43, Issue 2, 2024, Pages 29-49]
Ghasemi, A. R. Development of Circular Disk Model for Polymeric Nanocomposites and Micromechanical Analysis of Residual Stresses in Reinforced Fibers with Carbon Nanotubes [Volume 35, Issue 2, 2017, Pages 177-196]
Ghasemi, M. 3D Investigation of Tubular PEM Fuel Cell Performance Assuming Fluid- Solid- Heat Interaction [Volume 41, Issue 1, 2022, Pages 79-99]
Ghasemi, M. R. Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
Ghasemi Ghalebahman, Ahmad A New Bond-Based Peridynamic Model with the Ability to Model Elastoplastic Behavior [Volume 42, Issue 1, 2023, Pages 125-139]
Ghassemi, H. Free and Forced Vibrations of a Shaft and Propeller Using the Couple of Finite Volume Method, Boundary Element Method
and Finite Element Method [Volume 34, Issue 2, 2016, Pages 13-36]
Ghavamifar, A. Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2019, Pages 61-78]
Ghazi Mirsaeed, S. A. New DKFT Elements for the Finite Element Analysis of Thin
Viscoelastic Plates [Volume 38, Issue 1, 2019, Pages 81-100]
GH. Feizi, The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
GH. Gahanshahi, The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Ghiasi, R. Structural Damage Detection using Frequency Response Function Index and Surrogate Model Based on Optimized Extreme Learning Machine Algorithm [Volume 36, Issue 1, 2017, Pages 1-17]
Ghiasi, R. Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
GH. Moslehi and A. R. Rezaie, An Algorithm for Two Dimensional Cutting Stock Problems with Demand [Volume 23, Issue 2, 2005, Pages 59-76]
GH. Moslehi and H. Ghahar, A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2007, Pages 11-30]
Ghodrati Amir, G. Damage Identification in Shear Frames via Grey Relation Theory and Static Displacement Estimated by Limited Modal Data [Volume 34, Issue 1, 2015, Pages 139-154]
Ghomeshi Bozorg, M. Stability Analysis of a Beam under the Effect of Moving Masses using Homotopy Perturbation Method [Volume 34, Issue 1, 2015, Pages 79-95]
Ghomeshi Bozorg, M. Dynamic Instability Analysis of Transverse Vibrations of Functionally Graded Rectangular Plates under Moving Masses [Volume 41, Issue 1, 2022, Pages 37-59]
Gh. Yousefi, Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Gilavand, P. Numerical Study of the Effect of Nanofluid on Heat Transfer of a Channel in the Presence of Variable Magnetic Field with Obstacles [Volume 40, Issue 2, 2022, Pages 81-94]
G. Karami and M. R. Hematiyan, Boundary Element Analysis of Nonlinear Heat Conduction Problem with Point, Line and Distributed Heat Sources Employing Analytical integrations [Volume 18, Issue 2, 1999, Pages 141-153]
G. Mirjalily, Adaptive Decision Fusion in Detection Networks [Volume 19, Issue 1, 2000, Pages 1-14]
G. Mirjalily, Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2007, Pages 1-10]
G. Moslehi, A Fuzzy Algorithm for the m-Machine, n-Job Flow Shop Sequencing Problem [Volume 17, Issue 1, 1998, Pages 33-41]
G. Moslehi and M. Mahnam, Net Present Value of Cash Flows in Single Machine and Flow Shop Scheduling Problems [Volume 27, Issue 2, 2009, Pages 49-65]
Golmakani, M. E. Buckling Analysis of Functionally Graded Carbon Nanotube-reinforced Composite Plates using Incremental Loading and Dynamic Relaxation Methods [Volume 35, Issue 1, 2016, Pages 43-63]
Golmakani, M. E. Nonlinear Bending Analysis of Composite Cylindrical Shells Reinforced by Functionally Graded Carbon Nanotube in Circumferential Direction [Volume 36, Issue 1, 2017, Pages 47-65]
G. R. Yousefi and H. Seifi, Induction Motor Electric Parameters Estimation Using Artificial Neural Networkds and its Application in industrial Load Modeling [Volume 19, Issue 2, 2001, Pages 19-30]
G. Vosoughi and A. Sekhavat, Minimizing Amplitude of Oscillation of a Suspended Object during Transport by a Robot [Volume 14, Issue 1, 1994, Pages 57-67]
H
H.A. Abyaneh, A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2009, Pages 1-17]
Haftbaradaran, H. The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Haftbaradaran, H. Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2021, Pages 97-117]
H. Ahmadi, A Mathematical Model for the Estimation of Ghanats Water Storages. [Volume 8, Issue 1, 1990, Pages 61-101]
H. Ahmadikia, Numerical and Analytical Study of Natural Dry Cooling Tower in a Steam Power Plant [Volume 26, Issue 1, 2007, Pages 183-195]
Hajrahimi, Arezoo Nonlinear free vibration analysis of moderately thick sandwich plates with viscoelastic core using finite strip method [Volume 43, Issue 1, 2024, Pages 119-135]
Hajzaman, R. Numerical Study of Natural Convection Heat Transfer of Nanofluid in a Square Shaped Porous Media using Lattice Boltzmann Method [Volume 35, Issue 2, 2017, Pages 47-64]
H.Alavi, Recognition of Handwritten Persian Numbers and Arithmetic Symbols Using Neural Networks [Volume 12, Issue 1, 1993, Pages 49-71]
Hamidifard, Masoud Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2024, Pages 87-108]
Hamidreza Momeni, Application of a Direct Model Reference Adaptive Controller (DMRAC) in a Nonlinear Cardiovascular Model [Volume 22, Issue 2, 2004, Pages 35-49]
Hamzavi, Ahmad Numerical Modeling of Radiative Transfer in NETmix Photocatalytic Reactors Using Hamiltonian-Based Ray Tracing in COMSOL [Volume 44, Issue 1, 2025, Pages 103-131]
Hashemi, S. Numerical Analysis of Thermo-Mechanical Coupling in Shape Memory Alloys [Volume 34, Issue 2, 2016, Pages 1-12]
Hashemi, Seyed Farzad Supply chain coordination mechanism with time- based discounts and prepayment ratio for perishable products under budget constraint [Volume 43, Issue 2, 2024, Pages 83-106]
Hashemian, M. Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Hassan Baziar, M. Effect of Underground Structure on PGA at Ground Surface Considering Linear and Nonlinear Behaviour for the Soil [Volume 34, Issue 1, 2015, Pages 119-137]
Hassan Haddadpour, Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
Hassani, Behrooz An efficient method for applying distributed loads on curved surfaces in isogeometric analysis [Volume 43, Issue 2, 2024, Pages 107-125]
Hatami, S. Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2019, Pages 113-138]
H. Basirat Tabrizi, Solution of Laminar Boundary Layer and Turbulent Free Jet With Neural Networks [Volume 17, Issue 2, 1998, Pages 129-137]
H. Behbahani and M. Abtahi, An Improved Methodology for Measurement of Uninterrupted â Flow Capacity Affected by Pavement Condition [Volume 26, Issue 1, 2007, Pages 79-91]
H. Deldari, Parallel Genetic Algorithm Using Algorithmic Skeleton [Volume 22, Issue 2, 2004, Pages 1-19]
H. Edris, Intermix Modeling of Grade Change Operations in Steel Slab Continuous Casting Process [Volume 27, Issue 2, 2009, Pages 165-181]
Heidari, H. R. Numerical Study of the Effect of Nanofluid on Heat Transfer of a Channel in the Presence of Variable Magnetic Field with Obstacles [Volume 40, Issue 2, 2022, Pages 81-94]
Heinze, S. Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Hejazi, S. R. Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Hendesi, Ehsan Investigation of the static stable states of a bistable composite rectangular plate with curved fibers and piezoelectric layers [Volume 44, Issue 1, 2025, Pages 21-41]
H. Fahimi, Image Reconstruction from Incomplete Data [Volume 13, Issue 1, 1993, Pages 47-61]
H. Farzanehfard, Design and Realization of an Improved De-Q-ing Circuit for Regulation of Modulator Output Pulse Amplitudes in a Radar Transmitter [Volume 18, Issue 2, 1999, Pages 19-31]
H. Farzanehfard, Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2003, Pages 29-44]
H. Farzanehfard, Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype [Volume 23, Issue 2, 2005, Pages 25-38]
H. Fazeli, An Experimental Study of the Aerodynamic Behavior of the Two Wrap Around Fin Missiles [Volume 21, Issue 1, 2002, Pages 141-152]
H. Ghiassian and G. R. Poorebrahim, Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers [Volume 23, Issue 2, 2005, Pages 113-131]
H. Ghoudjehbaklou and H. Seifi, Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
H. Javidi, Evaluation of Non-Utility Generation Impacts On Preventive-Corrective Control of Power Systems [Volume 19, Issue 2, 2001, Pages 31-46]
H. Khabbazi, Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface [Volume 26, Issue 1, 2007, Pages 313-322]
H. Khademyzadeh, A Theoretical Study of Wall Ironing for Anisotropic Workharden Materials [Volume 7, Issue 1, 1989, Pages 91-116]
H. Khaleghi, Development of an Upwind Algorithm at Subsonic Regions in the Solution of PNS Equations [Volume 22, Issue 1, 2003, Pages 155-165]
H. Khaleghi and M.S. Sadeghipour, A Modified Flux Vector Splitting Scheme for Flow Analysis in Shock Wave Laminar Boundary Layer Interactions [Volume 20, Issue 2, 2001, Pages 167-180]
H. Khalili S. H. Amirshahi, An Algorithm for Color Matching of Textiles With Elimination of Limitation on Primaries [Volume 17, Issue 1, 1998, Pages 187-196]
H. Khaloozadeh, On the Predictability of Price Fluctuations in Tehran Stock Exchange A Correlation Dimension Estimation Approach [Volume 18, Issue 1, 1999, Pages 193-200]
H. Mir- Mohamad-Sadeghi, Dynamic Analysis of the Interaction Between Water Waves and Offshore Structures [Volume 7, Issue 1, 1989, Pages 5-28]
H. M. M. Sadeghi and H. Bayat, investigation of Parameters Affecting Abrasion Resistance of R.C.C. [Volume 24, Issue 1, 2005, Pages 155-176]
H. Modaraei, Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2008, Pages 17-31]
H. Moeshginkelk, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
H. Moharami and S. M. Riazi-Mazloumi, An Innovative Method for The Analysis of Structures with Tension-only Members [Volume 20, Issue 1, 2001, Pages 69-81]
H. Moharrami, Optimization of Cathodic Protection on Offshore Structures [Volume 26, Issue 1, 2007, Pages 49-63]
H. Momeni, A New Analytical Approach to Flight Equations [Volume 19, Issue 2, 2001, Pages 9-17]
H. Moslemi Naeini, FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
H. Nahvi and M. Sobhani, Dynamic and Stability Analysis of Flexible Cam-Follower Systems [Volume 22, Issue 2, 2004, Pages 117-136]
H. Nezamabadi-Pour, A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
H. Niazmand and S. A. Mirbozorgi, Three Dimensional Analysis of Flow Past a Solid-Sphere at Low Reynolds Numbers with the Aid of Body Fitted Coordinates [Volume 20, Issue 2, 2001, Pages 191-206]
H. Nosraty, Simulation Model for Weft Yarn Motion in a Single-Nozzle Air-Jet Loom [Volume 19, Issue 2, 2001, Pages 161-168]
Hosseinejad, F. Dynamic Analysis of Porous Media using Generalized Plasticity Model and Non-Darcy Flow Rule [Volume 38, Issue 1, 2019, Pages 101-118]
Hosseini, S. M. Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Hosseinlou, F. Finite Element Model Updating of an Offshore Jacket Platforms using Experimental Modal Analysis [Volume 36, Issue 1, 2017, Pages 67-84]
Hosseinlou, F. Simulation of Simplified Computational Model of Jacket Structure with Timoshenko Cantilever Beam and Experimental Signature [Volume 40, Issue 2, 2022, Pages 19-37]
H. R. Bahrampuri and N. Niksefat, Dynamic Analysis and Stability of Articulated Liquid Cargo Vehicles with Tank Baffles [Volume 20, Issue 1, 2001, Pages 219-232]
H.R. Khazaki, Application of Fuzzy Decision-Making to Facility Layout Planning [Volume 27, Issue 2, 2009, Pages 31-47]
H.R. Momeni and A.Kh. Sedigh, Determination of Relay Switching Time, Evaluation of Disturbance and Noise Effect and Transient Behavior in Robust Binary Control [Volume 18, Issue 2, 1999, Pages 45-59]
H. R. Momeni and N. Sadati, Dynamic Modeling for Earth â Pointing Satellites to Control the Three â axis Attitude without the Attitude Information of One Axis [Volume 21, Issue 2, 2003, Pages 1-14]
H. R. Momeni and N. Sadati, Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
H. R. Saligheh Rad and M. Saeedifard, Space Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters [Volume 23, Issue 1, 2004, Pages 15-32]
H. R. Sheibani and H. Bayyat, Velocity Profile and Reynolds Shear Stress in Overflow Gabion Dam Crest [Volume 26, Issue 1, 2007, Pages 13-25]
H. Saeedi, Performance Improvement of Radar Target Detection by Wavelet-based Denoising Methods [Volume 24, Issue 1, 2005, Pages 17-29]
H. Seifi, Application of Fuzzy Linear Programming in Optimal Load Shedding and Generation Reallocation Problem [Volume 15, Issue 2, 1997, Pages 27-42]
H. Seifi, Genetic Algorithm- Based Active Power Filter Allocation and Size Determination [Volume 21, Issue 1, 2002, Pages 29-41]
H. Seifi, A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
H.Seifi and M. S. Ghazi-zadeh, Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
H. Shakib, Evaluation of Seismic Behaviour of Ferrocement Elevated Water Tanks by Using Ambient Vibrations Tests [Volume 17, Issue 1, 1998, Pages 53-69]
H. Shakib and M. SadrNeshin, Evaluation of Torsional Provisions of Seismic Codes Considering Effects of Soil-Structure Interaction [Volume 18, Issue 1, 1999, Pages 89-101]
H. Taheri Shahraeeni and J. Ghayoomian, The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
H. Yan, The Effect of Current Density on Morphology and Texture of Zinc Electrodeposit on Steel [Volume 20, Issue 1, 2001, Pages 207-217]
H. Z. Aashtiani and B. Hejazi, Solving Bus Terminal Location Problem Using Simulated Annealing Method [Volume 20, Issue 2, 2001, Pages 125-140]
H. Zamani and S. Ziaiee Rad, Coupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades [Volume 26, Issue 1, 2007, Pages 165-182]
I
I. Nakhaee, Batch Scheduling in Flexible Flow Shop [Volume 26, Issue 2, 2008, Pages 41-52]
I. Noorbehesht, Mineralogical and Petrological Investigation of Iron Ore Deposits in North- East of Isfahan [Volume 10, Issue 1, 1991, Pages 31-60]
Isavi, Zahra Rolling Contact Fatigue Analysis of Bearings in the Presence of Oil Lubrication Considering the Effect of Pitting[Volume 45, Issue 1, 2026, Pages 181-201]
J
Jabbarzadeh, M. The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2021, Pages 59-72]
Jabbarzadeh, M. Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Jadidi, M. Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2017, Pages 85-112]
Jafari, M. Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2019, Pages 1-15]
Jafari, Mohammad Simulation of Strain-Induced Grain Boundary Migration via Coupling Phase-Field and Crystal Plasticity Methods: Effect of Representative Volume Element Size [Volume 45, Issue 1, 2026, Pages 131-149]
Jafari, Nasrin Nonlinear free vibration analysis of moderately thick sandwich plates with viscoelastic core using finite strip method [Volume 43, Issue 1, 2024, Pages 119-135]
Jafari, S. S. Free Vibration of Functionally Graded Variable Thickness Carbon Nanotube Annular Plates [Volume 35, Issue 2, 2017, Pages 131-158]
Jafarian, A. Simulation of Underwater Explosion with Cavitation using ALE Method [Volume 34, Issue 2, 2016, Pages 73-85]
Jafari-Talookolaeilokoolaei, R. A. Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
Jafarzadeh, F. Simulation of a Helium Atmospheric Plasma Jet Using Fluid Equations [Volume 41, Issue 1, 2022, Pages 121-133]
Jafarzadeh, Hossein Two-dimensional micromechanical analysis of fracture in human cortical bone tissue using the phase-field method [Volume 43, Issue 2, 2024, Pages 143-161]
Jafarzadeh, Hossein Phase-Field Modeling of Grain Growth Under Thermal Gradients in SLM Additive Manufacturing Process [Volume 44, Issue 1, 2025, Pages 133-151]
Jahangiri, R. The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2022, Pages 109-126]
Jamei, M. A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2020, Pages 1-22]
Jamshidian, M. Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2019, Pages 1-15]
Jamshidian, Mostafa Phase-Field Modeling of Grain Growth Under Thermal Gradients in SLM Additive Manufacturing Process [Volume 44, Issue 1, 2025, Pages 133-151]
Jamshidian, Mostafa Simulation of Strain-Induced Grain Boundary Migration via Coupling Phase-Field and Crystal Plasticity Methods: Effect of Representative Volume Element Size [Volume 45, Issue 1, 2026, Pages 131-149]
Jamshidi Chenari, R. The Effect of Mechanical Anisotropy and Heterogeneity of Shear Strength Parameters of Soils on Drained Bearing Capacity of Shallow Foundations [Volume 36, Issue 1, 2017, Pages 137-147]
Janipour Bidsardareh, V. Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Javadi, Babak Supply chain coordination mechanism with time- based discounts and prepayment ratio for perishable products under budget constraint [Volume 43, Issue 2, 2024, Pages 83-106]
Javanbakht, Mahdi Two-dimensional micromechanical analysis of fracture in human cortical bone tissue using the phase-field method [Volume 43, Issue 2, 2024, Pages 143-161]
Javanbakht, Mahdi On the Use of Error Weight Function in the Numerical Solution of Nonlocal Problems Using the Finite Element Method [Volume 44, Issue 2, 2025, Pages 151-165]
Javanbakht, Mehdi Simulation of Tumor Growth and Division Under Chemical Driving Forces Using the Phase Field Method [Volume 44, Issue 2, 2025, Pages 105-126]
J. A. Zakeri, Impacts of Wheelârail at Railway Turnouts [Volume 27, Issue 1, 2008, Pages 85-101]
J.Bazargan and H. Bayat, Determination of the Nonlinear Equation Coefficients for Flow through Coarse Alluvium Foundations [Volume 21, Issue 1, 2002, Pages 101-112]
J. Emadi, Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method [Volume 24, Issue 1, 2005, Pages 391-399]
J. Heirani Nobari, A New Analytical Approach to Flight Equations [Volume 19, Issue 2, 2001, Pages 9-17]
J.L. Wearing and M.A. Sheikh, A Regular Indirect Boundary Element Method for Thermal Analysis [Volume 8, Issue 1, 1990, Pages 103-136]
J. Mahdavi and A Emaadi, Analysis of Power Electronic Converters Using the Developed State Space Averaging Method [Volume 16, Issue 1, 1997, Pages 51-65]
Joseph Haggin, Methane- to- Gasoline Plant Adds to New Zealand Liquid Fuel Resources [Volume 6, Issue 1, 1988, Pages 79-88]
J. Safarian-Dastjerdi and A. Saidi, Effects of Coating Golegohar-Chadormalu Pellet on Its Behaviour in Direct Reduction Process [Volume 24, Issue 1, 2005, Pages 425-433]
J. Soltani and Ak. Gozine, Computer Simulation of Current Transformers Using a New Steel-Iron Core Magnetization Model [Volume 15, Issue 2, 1997, Pages 43-62]
J. Soltani and F. Katiraei, Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
J. Soltani and M. Fallah, The Vector Control of Three-Phase Salient Pole Synchronous Machines Supplied by Pulse-Width- Modulated Voltage Source Inverters [Volume 17, Issue 2, 1998, Pages 1-19]
J. Soltani and N. R. Abjadi, Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2004, Pages 21-34]
J. Soltani and S. Sadr Arhami, Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method [Volume 20, Issue 1, 2001, Pages 13-28]
K
K. A. Attari, N. Vibration Control of Structures using Vibro-Impact Nonlinear Energy Sinks [Volume 35, Issue 1, 2016, Pages 123-142]
K. Abbaszadeh, Estimation of Induction Motor Speed by EKF In Stationary Frame and Use of Rotor Flux and Study of Parameter Variations [Volume 18, Issue 2, 1999, Pages 11-18]
K. Abedi, Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
Kadkhodaei, M. Estimating High Cycle Fatigue Lifetime using Chaboche-Lemaitre Damage Model [Volume 35, Issue 1, 2016, Pages 27-41]
Kalani, H. Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2017, Pages 113-129]
Kalateh, F. Dynamic Analysis of Porous Media using Generalized Plasticity Model and Non-Darcy Flow Rule [Volume 38, Issue 1, 2019, Pages 101-118]
Kalatjari, V. New DKFT Elements for the Finite Element Analysis of Thin
Viscoelastic Plates [Volume 38, Issue 1, 2019, Pages 81-100]
K. Alavie and M. M. Jafariean, Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
Kamza, M. Extending Lattice Discrete Particle Model of Concrete for Non-circular Aggregates [Volume 35, Issue 1, 2016, Pages 11-25]
Karami mohammadi, A. Analysis and Comparison of Nonlinear Dynamic Behavior of Viscoelastic and Elastic Rectangular Plates under Supersonic Aerodynamic Flow [Volume 40, Issue 1, 2021, Pages 125-151]
Karami Mohammadi, A. On the Effect of Thermoelastic Damping in Nonlinear Micro Electro Mechanical Resonators using Differential Quadrature Method [Volume 34, Issue 1, 2015, Pages 1-10]
Kargarsharifabad, H. Numerical Study of Ferrofluid Forced Convection Heat Transfer in Tube with Magnetic Field [Volume 34, Issue 1, 2015, Pages 11-25]
Karimi, Mohammad Investigation and Analysis of Turbulence Models in Turbulent Flow in Tubular Thermal Economizers[Volume 45, Issue 1, 2026, Pages 91-115]
Karimpouli, Sadegh Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2023, Pages 29-60]
Kashai, E. Heat Transfer Enhancement of Al2O3âH2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method [Volume 40, Issue 2, 2022, Pages 1-18]
Kavandi, Pouya A DR-BEM Model for a Half-Space Including the Cavity under Scalar Surface Pulse [Volume 43, Issue 2, 2024, Pages 69-82]
Kazemi, Alireza Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2023, Pages 117-136]
Kazemi, M. Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2022, Pages 39-56]
K. Badi, Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2005, Pages 1-10]
K. Badv, Fundamentals of the Capture Zone Calculations to Qualitatively Protect Cities Drinking Water Wells [Volume 23, Issue 2, 2005, Pages 77-91]
K. Badv, Evaluation of Optimum Landfill Design by Contaminant Transport Analysis [Volume 24, Issue 1, 2005, Pages 135-153]
Keshavarzi, R. Buckling Analysis of Variable Stiffness Composite Laminates by Semi-Analytical Finite Strip Method [Volume 39, Issue 2, 2021, Pages 73-95]
K. Eshgee and M. Kazemi, Ant Colony Algorithm for the Single Loop Routing Problem [Volume 23, Issue 1, 2004, Pages 71-81]
K. Eshghi and H. Djavanshir, An Efficient Algorithm for Reducing the Duality Gap in a Special Class of the Knapsack Problem [Volume 24, Issue 1, 2005, Pages 47-57]
K. Eshghi and S. Pasalar, Application of Tabu Search to a Special Class of Multicommodity Distribution Systems [Volume 20, Issue 2, 2001, Pages 43-54]
Keshmiri, M. Stability Analysis of a Beam under the Effect of Moving Masses using Homotopy Perturbation Method [Volume 34, Issue 1, 2015, Pages 79-95]
Keshmiri, M. Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
Keshtegar, B. Fuzzy Structural Reliability Analysis using the Dynamic Directional Stability Transformation Method [Volume 37, Issue 1, 2018, Pages 133-148]
Keshtegar, B. Random - weighted Monte Carlo Simulation Method for Structural Reliability Analysis [Volume 37, Issue 2, 2019, Pages 41-60]
Keshtegar, Behrouz The Bisection Method and the Accelerated Dynamical Mean Value Optimization Method in Comparison of Different Topology Optimization Approaches [Volume 43, Issue 1, 2024, Pages 41-67]
K. Esmaeili. Torkanpouri, K. Statistical Analysis of Energy Harvesting From Functionally Graded Cantilever Beam with Piezoelectric Layer [Volume 40, Issue 2, 2022, Pages 95-108]
K. Esmaili and J. Abrishami, Hydraulic Jump over Negative Slopes with Negative Steps [Volume 19, Issue 2, 2001, Pages 97-110]
Keyhanpour, M. 3D Investigation of Tubular PEM Fuel Cell Performance Assuming Fluid- Solid- Heat Interaction [Volume 41, Issue 1, 2022, Pages 79-99]
K. Farmanesh and A. Najafi-Zadeh, Microstructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation [Volume 23, Issue 1, 2004, Pages 189-201]
K. Farzad and M. Naghipour, Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
K. Golshan and S. J. Hashemian, The Transition Stage in the Start-up of an Anaerobic Sludge Digester [Volume 19, Issue 1, 2000, Pages 15-21]
Khademalrasoul, A. Comparison between Isogeometric Analysis and Extended Finite Element Methods in Discontinuities Modeling and Stress Intensity Factor Calculation [Volume 35, Issue 1, 2016, Pages 83-109]
Kharazi, Mahsa Modeling Simple Shear Deformation in Hyperelastoplasticity: A Numerical Integration Algorithm in the Intermediate Configuration [Volume 43, Issue 1, 2024, Pages 137-152]
Khashei, M. A Hybrid Intelligent Classification Model Based on Multilayer Perceptron Neural Networks and Fuzzy Regression for Credit Scoring Problems [Volume 37, Issue 2, 2019, Pages 97-111]
Khashei, M. Electricity Load Forecasting by Combining Adaptive Neuro-fuzzy Inference System and Seasonal Auto-Regressive Integrated Moving Average [Volume 38, Issue 1, 2019, Pages 119-129]
Kheirkhah Barzaki, Nasrin A novel technique for local mesh refinement in the finite element method based on the alternative shape functions [Volume 43, Issue 2, 2024, Pages 1-26]
Khoshbavar Rad, E. Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2019, Pages 79-96]
Khoshraftar, N. Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2017, Pages 113-129]
Kiamansori, M. Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2017, Pages 85-112]
Kiani Rashid, Effect of Aluminum on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys [Volume 14, Issue 1, 1994, Pages 19-35]
K. Matin, Yarn Tension along Cone Winding using a Controlling Loop [Volume 26, Issue 1, 2007, Pages 323-328]
K. Mazaheri and B. Lesani, Adaptive Solution of Steady Two Dimensional Flow on an Unstructured Grid [Volume 17, Issue 2, 1998, Pages 83-95]
K. Mazaheri and H. Assadollahi, Determination of the Parameters in HOM and BKW Equations of State for Detonation Products [Volume 21, Issue 2, 2003, Pages 73-89]
K. Mirtalaei and N. Asadi Zeidabadi, Parametric Study of Qutrigger Braced and Belt System in Tall Building Structures [Volume 19, Issue 1, 2000, Pages 61-74]
K. Mirtalaei and S.S. Mahini, Analysis of Tall Buildings with Bundled Tube System Subjected to Wind and Earthquake loads [Volume 17, Issue 1, 1998, Pages 43-52]
K. Norouzian, Water Quality Zoning of Rivers by the Technique of Fuzzy Clustering Analysis [Volume 20, Issue 1, 2001, Pages 55-68]
Kouhbor, D. Low Velocity Impact Damage Prediction in Laminated Composite Plates [Volume 38, Issue 1, 2019, Pages 37-62]
Kouhikamali, Ramin Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Kouhikamali, Ramin Numerical simulation of supersonic natural gas flow passing through a Laval nozzle to assess the possibility of Dehumidification [Volume 44, Issue 1, 2025, Pages 85-102]
K. Raeissi, Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits [Volume 23, Issue 2, 2005, Pages 173-184]
K. Rezaie, A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
K. Rezaie and N. Seid Foroush Lahiji, A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
K. Zangeneh Madar and S. M. Monir Vaghefi, Effect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel [Volume 23, Issue 2, 2005, Pages 185-195]
L
Lajevardi, Seyed Ahmad Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2023, Pages 29-60]
Lakzian, H. On the Performance of Linear and Nonlinear Dynamic Absorbers for Beams Subjected to Moving Loads [Volume 36, Issue 1, 2017, Pages 99-113]
L. Estehghari, Effect of Strontium Dopant on Electrical Conductivity of Perovskites [Volume 19, Issue 2, 2001, Pages 147-159]
Loghmani, Ali Evaluation of Signal Processing and Deep Learning Methods for Inter-Beat Interval Extraction from Ballistocardiography Signals [Volume 44, Issue 2, 2025, Pages 49-61]
Lotfan, S. Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response [Volume 38, Issue 1, 2019, Pages 19-36]
L. Saidi, Modeling the Vertical Falling Life Chute [Volume 27, Issue 2, 2009, Pages 149-154]
M
M. Aalaei, Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
M. Abedi, H&infin Controller Design for Static VAR Compensators in Industrial Networks [Volume 17, Issue 2, 1998, Pages 169-177]
Maddah, Erfan Microstructure and texture investigation of commercial pure aluminium subjected to torsion deformation using crystal plasticity simulation [Volume 43, Issue 2, 2024, Pages 127-142]
Maghami, Shahram Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2023, Pages 61-82]
M. Aghdasi, Simulation of a Two Cards JIT Production System [Volume 17, Issue 1, 1998, Pages 13-31]
M. A. Golozar, The Role of Cathodic Poisons on the Stress Corrosion Cracking of Zircaloy- 2 in Methanolic Solution Containing 0.4vol.% Hydrochloric Acid [Volume 9, Issue 1, 1991, Pages 33-77]
M. A. Golozar, Investigation of Diamond Deposition on AISI 316 & 430 Stainless Steel Substrares [Volume 16, Issue 2, 1998, Pages 95-103]
M. A. Golozar, The production of Ceramic Thin Films by Sol-Gel Method [Volume 22, Issue 2, 2004, Pages 189-200]
M. A. Golozar, Annealing Effects on Microstructure and Microwave Properties of CuO-Doped (Zr0.8Sn0.2)TiO4 [Volume 27, Issue 2, 2009, Pages 199-211]
M.A. Golozar, The Effect of Heat Treatment Cycle on Microstructure and Mechanical Properties of Austempered Ductile Iron with Various Copper Contents. [Volume 8, Issue 1, 1990, Pages 31-60]
M.A. Golozar, Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys [Volume 13, Issue 1, 1993, Pages 63-91]
M.A. Golozar, Effective Parameters on Diamond Deposition Using Combustion Flame [Volume 14, Issue 1, 1994, Pages 1-17]
M.A. Golozar, Effect of Aluminum on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys [Volume 14, Issue 1, 1994, Pages 19-35]
M.A. Golozar and K. Khosravi, Corrosion Behavior of Dental Amalgams, in Vitro Tests [Volume 15, Issue 1, 1994, Pages 45-55]
M. A. Golozar and R. Bagheri, Quality of High Density Polyethylene on Plain Carbon Steel and the Role of Primers [Volume 19, Issue 1, 2000, Pages 23-33]
Mahaki, Mohammadbagher Numerical Simulation of the Flow on a flying boat Propeller in Different Working Conditions [Volume 45, Issue 1, 2026, Pages 203-226]
Mahboubi, . R. Discrete Element Method for Modeling the Mechanical Behavior of Unsaturated Granular Material [Volume 35, Issue 1, 2016, Pages 157-181]
Majidi, Noorollah A review of wavelet theory and its applications in structural and earthquake engineering [Volume 43, Issue 1, 2024, Pages 1-40]
Malakzadeh Fard, Keramat Dynamic Stability Analysis of FGM Beams Based on the Nonlinear Timoshenko Model [Volume 42, Issue 1, 2023, Pages 63-76]
M. Alimardani, A Study of Geochemical Evolution of Carbonate Sediments in Zefreh Area [Volume 5, Issue 1, 1987, Pages 105-112]
M. Alizadeh, Intermix Modeling of Grade Change Operations in Steel Slab Continuous Casting Process [Volume 27, Issue 2, 2009, Pages 165-181]
M. Alizadeh and H. Edriss, Inclusion Shape Control and its Effects on the Impact Property of the API X42 Steel [Volume 21, Issue 2, 2003, Pages 133-144]
M. A. Lotfollahi Yaghin, Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
M. Amani, Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform [Volume 23, Issue 1, 2004, Pages 221-227]
M. A. Masoumnia, Educational Article:Gramians and Balanced Realizations and their Application in System Order Reduction [Volume 10, Issue 1, 1991, Pages 87-120]
M. A. Massoumnia, A New Guidance Method for Surface to Surface Ballistic Missiles without Mandatory Engine Cut-Off [Volume 17, Issue 2, 1998, Pages 179-184]
M. Ameri and S.M. Fagheih, Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2009, Pages 123-137]
M. Amin-Nayeri and G. Moslehi, An Optimum Algorithm for Single Machine with Early/Tardy Cost [Volume 19, Issue 1, 2000, Pages 35-48]
M.A. Niazi, Thermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method [Volume 24, Issue 2, 2006, Pages 159-170]
Mansourpour, Zahra Simulation of Non-Isothermal Flow of Rubber in Banbury Mixer Using Computational Fluid Dynamics [Volume 42, Issue 1, 2023, Pages 43-62]
M.A.Rowshanzamir and A. Jafari, Investigation of Shear Strength Anisotropy of c- &phi Soils [Volume 24, Issue 2, 2006, Pages 87-103]
M. Asgaree and M. S. Seif M., Hydrodynamic Resistance Reduction in Catamaran Assisted Hydrofoils [Volume 24, Issue 1, 2005, Pages 251-269]
Mashayekhi, M. Estimating High Cycle Fatigue Lifetime using Chaboche-Lemaitre Damage Model [Volume 35, Issue 1, 2016, Pages 27-41]
Mashhadi Mohammad Reza, N. A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
Matin Ghahfarokhi, Zahra Impact of Calcified Plaque Material Properties on TAVI Performance: A Finite Element Analysis [Volume 44, Issue 2, 2025, Pages 79-104]
M. Azhari, Linear and Nonlinear Analysis of Cable Stayed Bridges By Fourier Series [Volume 7, Issue 1, 1989, Pages 61-90]
M. Azhari, Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
M.Azhari and S. Hooshdar, Local Buckling of Plates Using The Spline Finite Strip Method [Volume 16, Issue 2, 1998, Pages 39-49]
Mazrouei, Nematollah Thermodynamic-Environmental Assessment of ConvertingIran’s Gas Power Plants to Combined Cycle [Volume 45, Issue 1, 2026, Pages 151-180]
M. Bahrami and S. H. Sadati, Minimum-Time Roll Around the Velocity-Vector Maneuver of Aircraft [Volume 20, Issue 1, 2001, Pages 173-187]
M. B. Menhaj and A. Shabani, Solution of Laminar Boundary Layer and Turbulent Free Jet With Neural Networks [Volume 17, Issue 2, 1998, Pages 129-137]
M. Borgheie and M.H Saeidi, Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2006, Pages 69-86]
M. Chalkosh Amiri, A Note on the âSimulation of Gas Diffusion in Capillaries and Porous Solidsâ [Volume 14, Issue 1, 1994, Pages 117-120]
M. Danesh, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
M. Darbandi, Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2007, Pages 167-181]
M. Davoodi and M. Razzaghi, Evaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM [Volume 22, Issue 1, 2003, Pages 109-127]
M. Dehestani, Investigation of the Behavior of Rubberized Concrete under Uniaxial Compressive Test [Volume 26, Issue 2, 2008, Pages 49-58]
M. Dehghan Manshadi, Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
M. Ebrahimi, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
M. Ebrahimi and A. Ghaderi, Evaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors [Volume 24, Issue 2, 2006, Pages 1-14]
M.E. Eslimi, An Algorithm for Finite Element Analysis of Tunnel Supports Based on the Winklerâs Theory [Volume 13, Issue 1, 1993, Pages 113-128]
M. Eftekhari, Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
M. E. Hamedani Golshan, Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
M.E. Hamedani Golshan, Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Mehdi Khashei and Mehdi Bijari, Using a Fuzzy Auto Regressive Integrated Moving Average Model for Exchange Rate Forecasting [Volume 26, Issue 2, 2008, Pages 67-75]
Mehrabian, S. Simulation of a Helium Atmospheric Plasma Jet Using Fluid Equations [Volume 41, Issue 1, 2022, Pages 121-133]
M. Eidiani, Assessment of ATC Using Voltage and Transient Stability, Simultaneously [Volume 23, Issue 2, 2005, Pages 11-24]
Meskini, Mohammad Study of the Free Vibration of Joined Hybrid Cylindrical-Conical Shells with the Generalized Differential Quadrature Method [Volume 42, Issue 1, 2023, Pages 89-103]
M. Fahimi and M. Yarandi, DEXSY2 A Dental Expert System for Diagnosis and Treatment [Volume 16, Issue 1, 1997, Pages 31-39]
M. Farid, Modified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems [Volume 27, Issue 2, 2009, Pages 103-122]
M. Farmad and M. Gaznavi, A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
M.Farzin, Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis [Volume 21, Issue 1, 2002, Pages 153-166]
M. Farzin and M Shariaty, Analysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method [Volume 14, Issue 1, 1994, Pages 17-30]
M. Farzin and M. Tajdari, Stress Analysis and Energy Estimation in Cold-Roll Forming Process [Volume 18, Issue 1, 1999, Pages 143-160]
M. F. Najafabadi and M. A. Golozar, Pilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag [Volume 23, Issue 1, 2004, Pages 179-188]
M. Ghaffari, Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2008, Pages 53-65]
M. Ghafoori- Ashtiani and A. Foyooz, Absolute Acceleration Transfer Function of Secondary Systems Subjected to Multi- Component Earthquakes [Volume 21, Issue 1, 2002, Pages 113-139]
M.Ghavami and S. Gazor, An Adaptive Self-adjusting Bandwidth Bandpass Filter without IIR Bias [Volume 19, Issue 2, 2001, Pages 1-8]
M. Ghayour, Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
M. Ghelich khani and S. Ghasemi, Fundamentals Design and Set up Radial Inflow Gas Turbine Research Lab [Volume 21, Issue 2, 2003, Pages 61-71]
M.Ghorbani, Effects of Carbon on the Microstructure and Hot Deformation Behavior [Volume 15, Issue 1, 1994, Pages 57-82]
M. Ghorbani and A.M. Saedi, Ternary Ni-Fe-Co Alloys Nanowire Electrodeposition [Volume 24, Issue 2, 2006, Pages 215-226]
M. Golafshani and A. H. Shooshtari, The Solution of Laminar Incompressible Flow Equation with Free Surfaces in Curvilinear Coordinates [Volume 17, Issue 2, 1998, Pages 109-128]
M. Golafshani and H. Ghassemi, Acoustic-Mean Flow Interaction in Solid Propellant Rocket Motors [Volume 19, Issue 2, 2001, Pages 125-146]
M. Golafshani and S. Ekrami, Numerical Investigation of Fluid Flow Characteristics Around Slide Gates Using Multi-Zonal Method [Volume 17, Issue 1, 1998, Pages 85-107]
M. Goodarzi and A. R. Azimian, Numerical Simulation of Free Surface Flows and Comparison of Symmetry and Real Boundary Conditions at the Free Surface [Volume 22, Issue 2, 2004, Pages 161-176]
M. G. Tafreshi, Yarn Tension along Cone Winding using a Controlling Loop [Volume 26, Issue 1, 2007, Pages 323-328]
M. H. Abbasi, Kinetic Analysis of Molybdenite Oxidation [Volume 11, Issue 1, 1992, Pages 23-43]
M. H. Abbasi, Authorâs Reply to âA Note on the Simulation of Gas Diffusion in Capillaries and Porous Solidsâ [Volume 14, Issue 1, 1994, Pages 121-124]
M. H. Abbasi, Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2008, Pages 59-70]
M.H. Abbasi, Simulstion of Gas Diffusion in Capillaries and Porous Solids [Volume 12, Issue 1, 1993, Pages 73-93]
M. H. Abbasi and J. Safarian, Determination of Relationship between Autoignition of Sponge Iron and Specification of the Iron Ores [Volume 19, Issue 1, 2000, Pages 175-188]
M. Haji Azizi and H. Moharrami, A New Method for Determination of Critical Slip Surfaces in Earth Slopes [Volume 18, Issue 2, 1999, Pages 97-115]
M. H. Bagheripour, A Rapid Optimization Method for Slip Surface in Earth Slopes Using Genetic Algorithm [Volume 25, Issue 2, 2007, Pages 93-112]
M. H. Enayati and M. Salehi, An Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites [Volume 25, Issue 2, 2007, Pages 183-190]
M.H. Enferadi and M. Azhari, Stability Criteria for Rectangular Plates Subjected to Intermediate and End Inplane Loads Using Spline Finite Strip Method [Volume 26, Issue 1, 2007, Pages 65-78]
M. H. Fathi, The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
M. H. Fathi, Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite [Volume 27, Issue 2, 2009, Pages 213-226]
M.H. Fathi, Corrosion Behavior of Dental Amalgams, in Vitro Tests [Volume 15, Issue 1, 1994, Pages 45-55]
M. H. Ghadiri Rad, M. H. Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2022, Pages 39-56]
M. H. Ghassemian Yazdi, An Automatic Fingerprint Classification Algorithm [Volume 18, Issue 1, 1999, Pages 1-11]
M. H. Modir Shanechi and E. Vaahedi, Assessment of ATC Using Voltage and Transient Stability, Simultaneously [Volume 23, Issue 2, 2005, Pages 11-24]
M. Hosseinalipour, A Numerical Study of Dynamic Detonability Characteristics of Two-phase Unconfined Fuel-Air Clouds [Volume 24, Issue 2, 2006, Pages 105-122]
M. h. Rahimian and M. Farshchi, Dynamic and Deformation of a liquid Droplet in a Convective Two-Dimensional Laminar Flow [Volume 16, Issue 2, 1998, Pages 1-15]
M. H. Rahimian and M. Farshchi, Effect of Nondimensional Parameters On the Internal Circulation of a Liquid Drop Moving with the Surrounding Gas [Volume 21, Issue 1, 2002, Pages 167-179]
Mirbagheri, Y. Two Dimensional Complex Wavenumber Dispersion Analysis
using B-Spline Finite Elements Method [Volume 34, Issue 2, 2016, Pages 37-50]
Miri, M. Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2017, Pages 1-22]
Miri, M. Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Mirzaei, M. Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2021, Pages 23-44]
Mirzaei, R. A New Approach for Solving Heat and Mass Transfer Equations of Viscoelastic Nanofluids using Artificial Optimization Method [Volume 38, Issue 1, 2019, Pages 1-18]
Mirzaei, S. Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2017, Pages 159-176]
Misra, A. K. Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
M. Izadi-Nia and M. T. Ahmadi, Vertical Contraction Joint Models for Nonlinear Dynamic Analysis of Concrete Arch Dam [Volume 19, Issue 2, 2001, Pages 79-96]
M. Jafarboland, Dynamic Modeling for Earth â Pointing Satellites to Control the Three â axis Attitude without the Attitude Information of One Axis [Volume 21, Issue 2, 2003, Pages 1-14]
M. Jafarboland, Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
M. Jafarboland, Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
M. Jamshidian, Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition [Volume 26, Issue 2, 2008, Pages 77-86]
M.J. Khanjani, Investigation of Submerged Vanes Array for Sediment Control at Intake Using a Physical Model [Volume 18, Issue 2, 1999, Pages 179-189]
M. J. Khanjani and J. Ahmad- Auli, Calculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method [Volume 20, Issue 2, 2001, Pages 207-215]
M. Kabganian and Ali A. A Jeddi, Simulation Model for Weft Yarn Motion in a Single-Nozzle Air-Jet Loom [Volume 19, Issue 2, 2001, Pages 161-168]
M. Kahrizi, Analysis of Aperture Coupled Microstrip Patch Antennas with a Superstrate Using the Space Domain Closed-Form Green`s Functions [Volume 16, Issue 2, 1998, Pages 105-115]
M. Kahrom, Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
M. Kahrom, Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
M. Kalantar and G. Fantozzi, Thermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock [Volume 22, Issue 1, 2003, Pages 189-202]
M. Kamalian, Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
M. Kamalian and A. Sohrabi Bidar, Transient Site Response Analysis of Nonhomogeneous Two-dimensional Topographic Features Using BEM [Volume 24, Issue 2, 2006, Pages 51-68]
M. Karamozian and A. Islami, Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
M. Karbasi, Study of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying [Volume 26, Issue 1, 2007, Pages 301-311]
M. Karimpoor Fard and N. Shariatmadari, Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
M. k. Beirami and M. Ilaghi Hoseiny, Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin. [Volume 24, Issue 1, 2005, Pages 97-119]
M. Keshmiri, Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory [Volume 26, Issue 1, 2007, Pages 221-232]
M. Khan-Mohammadi and M. S. Marefat, Experimental Evaluation of Performance Criteria for Reinforced Concrete Beams under Cyclic Loading [Volume 25, Issue 1, 2006, Pages 63-77]
M. K. Jafari, Evaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM [Volume 22, Issue 1, 2003, Pages 109-127]
M.K. Jafari and A. Sohrabi-Bidar, Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
M. Latifi, Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform [Volume 23, Issue 1, 2004, Pages 221-227]
M. Maarefat, Thermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method [Volume 24, Issue 2, 2006, Pages 159-170]
M. Maerefat and M. Soltanpour, FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
M. Maleki, A Constitutive Model for Sands [Volume 27, Issue 1, 2008, Pages 51-63]
M. Mani, Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
M. Mashayekhi, Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations [Volume 25, Issue 2, 2007, Pages 151-165]
M. M. Doustdar and K. Mazaheri, A Numerical Study of Dynamic Detonability Characteristics of Two-phase Unconfined Fuel-Air Clouds [Volume 24, Issue 2, 2006, Pages 105-122]
M. Menhaj and H. Kazemy, Estimation of Induction Motor Speed by EKF In Stationary Frame and Use of Rotor Flux and Study of Parameter Variations [Volume 18, Issue 2, 1999, Pages 11-18]
M. Milimonfared, Estimation of Induction Motor Speed by EKF In Stationary Frame and Use of Rotor Flux and Study of Parameter Variations [Volume 18, Issue 2, 1999, Pages 11-18]
M. Mirzaee and S. M. H. Karimian, Development of an Upwind Algorithm at Subsonic Regions in the Solution of PNS Equations [Volume 22, Issue 1, 2003, Pages 155-165]
M. M. Lotfi and M. Abadi, A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
M.M. Nayebi, Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2008, Pages 53-65]
M. Moallem, A New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control [Volume 20, Issue 1, 2001, Pages 29-42]
M. Moallem and A. Kiyoumarsi, The New Definitions for the Power Terms in Distorted and Unbalanced Conditions and Calculation of these Terms for an Electric Arc Furnace [Volume 23, Issue 2, 2005, Pages 207-215]
M. Modarres and F. Madani, Market-Product Strategic Planning by Applying Expert Systems [Volume 19, Issue 1, 2000, Pages 49-60]
M. Modarres-Hashemi and S. Sadri, Performance Improvement of Radar Target Detection by Wavelet-based Denoising Methods [Volume 24, Issue 1, 2005, Pages 17-29]
M. Moin and N. Moghadam, Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2005, Pages 1-10]
M. Monir-Vaghefi, The Effects of Agitation on the Properties of Antifriction Ni-P-MoS2 Composite Coatings [Volume 15, Issue 1, 1994, Pages 35-44]
M. Moradiyan, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
M. Motamedi, Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
M. M. Ranjbar and T. Riyazi, Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
M. M. Saadatpour, Dynamic Analysis of Linear Structural Systems with Nonlinear Vibrating Isolators Using Mode Superposition Method [Volume 9, Issue 1, 1991, Pages 5-32]
M. M. Saadatpour, Dynamic Analysis of Three Dimensional Asymmetric Isolated Structures [Volume 10, Issue 1, 1991, Pages 5-30]
M. M. Saadatpour, Dynamic Analysis of Asymmetric Structures Supported by a Sliding Foundation [Volume 14, Issue 1, 1994, Pages 56-80]
M. M. Saadatpour, Analysis of Free Vibration of Triangular Plates with Non-Uniform Linear Thickness and Arbitrary Boundary Conditions [Volume 18, Issue 2, 1999, Pages 117-127]
M.M. Saadatpour, An Algorithm for Finite Element Analysis of Tunnel Supports Based on the Winklerâs Theory [Volume 13, Issue 1, 1993, Pages 113-128]
M.M. Saadatpour, Earthquake Analysis of Base Isolated Structures Including Soil-Structure Interaction [Volume 15, Issue 1, 1994, Pages 27-55]
M.M saadatpour and B. Haghighi, An Analytical Method for the Evaluation of the RC Columns Capacity Strengthened by Concrete Overlays [Volume 14, Issue 1, 1994, Pages 41-56]
M. M. Saadatpour and N. A. Falah, Earthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface [Volume 14, Issue 2, 1996, Pages 73-82]
M. Naderi and S. A. K. Mousavi, Investigation of Some Properties and Durability of Concrete in Urumie Lake [Volume 26, Issue 1, 2007, Pages 131-148]
M. Naghipour and M. Raoufi, Estimation of Hydrodynamic Forces on the Cylinderical Smooth Piles to Random Waves and Currents [Volume 19, Issue 1, 2000, Pages 75-92]
M. Nematbakhsh, Mathematical Modelling of Pulmonary Edema [Volume 18, Issue 1, 1999, Pages 127-142]
Moeini, R. Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Moghimi, S. Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2017, Pages 113-129]
Mohammadi, M. Development of Circular Disk Model for Polymeric Nanocomposites and Micromechanical Analysis of Residual Stresses in Reinforced Fibers with Carbon Nanotubes [Volume 35, Issue 2, 2017, Pages 177-196]
Mohammadi, S. Numerical Analysis of Thermo-Mechanical Coupling in Shape Memory Alloys [Volume 34, Issue 2, 2016, Pages 1-12]
Mohammadi, S. A review of concurrent multiscale methods for the analysis of fine scale discontinuity problems [Volume 42, Issue 2, 2024, Pages 1-49]
Mohammadi, Yasamin Evaluation of the Creep Behavior of HP35Nb Heat Resistant Steel Using Finite Element Method [Volume 44, Issue 2, 2025, Pages 63-78]
Mohammadimehr, M. Nonlinear Buckling Analysis of Nano-composite Beam with Initial Geometrical Imperfection using Finite Element Method [Volume 36, Issue 2, 2018, Pages 79-98]
Mohammadiun, H. Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Mohammadiun, M. Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Mohammadzadeh Shirazi, Meisam Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2023, Pages 117-136]
Mohandesi, Nima Nonlinear Vibrations of Functionally Graded Graphene Reinforced Composite Cylindrical Shells Using the Multiple Scale Method [Volume 44, Issue 1, 2025, Pages 1-19]
Moharrami, Hamid Energy-Based Progressive Collapse Assessment of Steel FrameBuildings for Planning Multi-Stage Explosive Demolition[Volume 45, Issue 1, 2026, Pages 73-90]
Mohebbi, M. Optimal Tuned Mass Damper for Nonlinear Structure under
Different Earthquakes [Volume 34, Issue 1, 2015, Pages 45-62]
Mohieddin Ghomshei, M. Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM [Volume 41, Issue 1, 2022, Pages 135-154]
Mojtaba Rajaee, Flow Visualization by Conditional Sampling of a Single X-Wire Probe in a Very Long Run Experiment [Volume 14, Issue 2, 1996, Pages 1-11]
Molaei, A. Investigation on the effect of magnetic field on forced convection heat transfer of liquid metals in a microchannel heat sink [Volume 42, Issue 2, 2024, Pages 149-166]
M. Oliazadeh, Processing of Low Grade Fine Manganese Ore Using Flotation Method [Volume 21, Issue 2, 2003, Pages 159-166]
Mollapour, Y. Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
M. Omoomi, A New Fast Data Encryption Algorithm (FDE) [Volume 11, Issue 1, 1992, Pages 5-22]
Moomivand, S. Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Moosaie, Amin Modeling of Transient Nonlinear Heat Conduction with Temperature-Dependent Material Properties [Volume 44, Issue 2, 2025, Pages 167-188]
Moradi, M. Simulation of Elastic Wave Propagation through Steel/Epoxy Phononic Crystal Waveguide by Displacement-Based Finite Difference Method [Volume 36, Issue 1, 2017, Pages 39-46]
Moradi, Mozhdeh Robust Optimization Model for Project Scheduling Problem with Resource Constraints [Volume 44, Issue 2, 2025, Pages 127-149]
Moradloo, J. Nonlinear Dynamic Analysis of RC Shear Walls using Damage Mechanics Approach Considering Bond-Slip Effects [Volume 34, Issue 1, 2015, Pages 27-44]
Moradpouri, F. Seismic Wave-Field Propagation Modelling using the Euler Method [Volume 38, Issue 2, 2020, Pages 115-123]
Mosaddegh, Peiman Numerical Implementation of a Hyperelastic-Viscoplastic Constitutive Model to Simulate the Mechanical Behaviour of Two Segmented Thermoplastic Elastomer Polymers [Volume 44, Issue 2, 2025, Pages 19-47]
Mosadegh, H. Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Moshtagh, M. Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Moslehi, G. Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Mossaiby, F. Extending the Exponential Basis Functions Meshless Method to Solve Singular Plate Problems [Volume 34, Issue 2, 2016, Pages 87-103]
Mossaiby, F. The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Mossaiby, F. Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2021, Pages 97-117]
Mossaiby, F. A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Mossaiby, Farshid A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2023, Pages 1-28]
Motaghed, Mohammadhadi Analysis of Large-Scale Heat Conduction Problems Using a Modified Single-Level Fast Multipole Method [Volume 41, Issue 2, 2023, Pages 83-100]
Motamedi, Alireza Meshless Local Exponential Basis Functions with Up-To-Desired Continuity Order for Bending of Laminated Composite Plates [Volume 44, Issue 1, 2025, Pages 43-61]
Movahedian Attar, B. Study on the Dynamic Response of Single and Multi-Spans Beam Subjected to the Base Excitation Using Time Weighted Residual Method [Volume 40, Issue 1, 2021, Pages 1-15]
Movahedian Attar, Bashir A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
M. Palhang, Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2006, Pages 241-251]
M. Parsa, A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
M. Parsa Moghaddam, Evaluation of Non-Utility Generation Impacts On Preventive-Corrective Control of Power Systems [Volume 19, Issue 2, 2001, Pages 31-46]
M. Parvazinia, Comparison of Conventional and ModelØ Based Controllers for Controlling a Batch Polymerization Reactor [Volume 13, Issue 1, 1993, Pages 1-19]
M. Pasandideh Fard, Prediction of Radiation Heat Transfer from Combustion Gases in a Convergent- Divergent Nozzle Using Zoning Method [Volume 11, Issue 1, 1992, Pages 83-104]
M.R, Investigation of Submerged Vanes Array for Sediment Control at Intake Using a Physical Model [Volume 18, Issue 2, 1999, Pages 179-189]
M. Rabbani, A special Class of Stochastic PERT Networks [Volume 18, Issue 1, 1999, Pages 43-59]
M. Rabbani, (Q,r) Stochastic Demand Inventory Model With Exact Number of Cycles [Volume 21, Issue 1, 2002, Pages 71-80]
M. Rabbani, A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
M. Rabbani, Minimizing Stoppage Cost of an Assembly Line Using Genetic Algorithm [Volume 27, Issue 1, 2008, Pages 35-50]
M. Rabbani, A New Inventory Model for Deteriorating Items with Price-dependent Demand, Time-value of money, and Shortages [Volume 27, Issue 2, 2009, Pages 19-29]
M. Rafeeyan, A New Approach for QFT-type Robust Controller Design in Uncertain Multivariable Systems [Volume 18, Issue 1, 1999, Pages 161-169]
M. R. Aref, Design Algorithms for Doppler MTI and Filters (Using Chebyshev Approximation) [Volume 9, Issue 1, 1991, Pages 95-125]
M. R. Aref, A New Fast Data Encryption Algorithm (FDE) [Volume 11, Issue 1, 1992, Pages 5-22]
M. R. Aref, Adaptive Decision Fusion in Detection Networks [Volume 19, Issue 1, 2000, Pages 1-14]
M. R. Banan and A. Fouladi, A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results [Volume 22, Issue 1, 2003, Pages 57-73]
M.R. Bannazadeh, A Three- Dimensional Model of the Caspian Sea [Volume 21, Issue 1, 2002, Pages 207-220]
M. R. Behbahanifard, Earthquake Analysis of Base Isolated Structures Including Soil-Structure Interaction [Volume 15, Issue 1, 1994, Pages 27-55]
M. Rezaiee-Pajand and M.R. Salari, Discrete Direct Sensititivity Analysis Method of Bending Element with Six Degree of Freedom [Volume 15, Issue 1, 1994, Pages 11-22]
M. R. Forouzan, Ring Rolling FE Analysis in The Presence of the Guide Rolls [Volume 21, Issue 2, 2003, Pages 91-110]
M. R. Forouzan, Evaluation of Sizing Press Mill Performance in Slab Width Reduction Using FE Simulation [Volume 26, Issue 1, 2007, Pages 269-283]
M. R. Heidari, Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2006, Pages 171-191]
M.R. Khosrawi- Rad, A Procedure for Design of the Axial Flow Fans [Volume 7, Issue 1, 1989, Pages 29-59]
M.R. Maheri and A Rangbaran, Effects of Support Conditions on Dynamic Behaviour and Seismic Response of Ghadir Bridge [Volume 24, Issue 1, 2005, Pages 177-196]
M. R. Modarres- Razavi, Three Dimensional Analysis of Flow Past a Solid-Sphere at Low Reynolds Numbers with the Aid of Body Fitted Coordinates [Volume 20, Issue 2, 2001, Pages 191-206]
M. R. Omidkhah, A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
M. R. Rahimipour, Production of an Armor Steel Plate and the Study of its Mechanical and Ballistic Properties [Volume 14, Issue 1, 1994, Pages 37-55]
M. R. Rahimi pour and M. Moayeri, Investigation of Defects in Ferro-Tic Composites and their Prevention [Volume 25, Issue 1, 2006, Pages 167-178]
M.R. Rezaei and B. Rasouli, Optimization of Single Cell Protein Production from Cheese Whey Under Batch and Continuous Cultivation [Volume 18, Issue 1, 1999, Pages 33-42]
M.R. Sheidaii, Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
M. R. Soltani, An Experimental Study of the Aerodynamic Behavior of the Two Wrap Around Fin Missiles [Volume 21, Issue 1, 2002, Pages 141-152]
M. R. Soltani, Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2006, Pages 171-191]
M. R. Soltani, Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section [Volume 26, Issue 1, 2007, Pages 247-268]
M. R.Soltani, Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
M.R. Soltani, Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
M. R. Soltani and A. R. Davari, An Experimental Investigation of the Flowfield over a Low Aspect Ratio Wing [Volume 20, Issue 2, 2001, Pages 181-190]
M.R. Taban, Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2008, Pages 53-65]
M. R. Tabeshpour, Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2007, Pages 73-91]
M. R. Toroghinejad, Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
M. R. Toroghinezhad, Comparison of Carburizing and Boronizing Processes on Mechanical and Wear Properties of PM Parts [Volume 17, Issue 1, 1998, Pages 177-186]
M. Saghaein - nejad, Design and Construction of an Electromagetic Supension System for Vehicles [Volume 20, Issue 2, 2001, Pages 1-16]
M. Salehi, The Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers [Volume 17, Issue 2, 1998, Pages 155-168]
M. Salehi, Surface Characterization and Tribological Behaviour of Ti-Ni-P Intermetallic Coatings on Titanium Alloys [Volume 18, Issue 1, 1999, Pages 181-191]
M. Salehi, The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
M. Salehi and A.S. Ayatollahi, The Effect of Carbides Morphology on Tribological Behaviour of Ni-Hard 4 Cast Irons [Volume 15, Issue 2, 1997, Pages 63-73]
M. Salehi and F. Ashrafizadeh, Tribological Behaviour of Fe-Al Intermetallic Compound Coated Carbon Tool Steel [Volume 16, Issue 2, 1998, Pages 81-93]
M. Salehi and T. H North, Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2003, Pages 145-158]
M. Salimi, Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition [Volume 26, Issue 2, 2008, Pages 77-86]
M. Salimi and H. Khademizadeh, Experimental Investigations into the Collapse of Simple and Reinforced Thin-Walled Channel Beams under Bending Loads [Volume 17, Issue 1, 1998, Pages 153-164]
M. Salimi and H. R. Malek, Investigations into the Effect of Tension Between the Stands of the Finishing Mill on Width Control in a Hot Rolling Process [Volume 15, Issue 2, 1997, Pages 95-105]
M. Salimi and M. S. Gadala, Ring Rolling FE Analysis in The Presence of the Guide Rolls [Volume 21, Issue 2, 2003, Pages 91-110]
M. Salimi and S. Asghari, Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication [Volume 24, Issue 1, 2005, Pages 283-297]
M. Salmani-Tehrani and S.H. Hashemolhoseini, Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis [Volume 21, Issue 1, 2002, Pages 153-166]
M. Sayadi and M. M. Moshksar, Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
M. Seddighi, Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section [Volume 26, Issue 1, 2007, Pages 247-268]
M. Sefid and A. A. Rostami, Determination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids [Volume 22, Issue 1, 2003, Pages 129-142]
M. Setayesh Nazar, Evaluation of Non-Utility Generation Impacts On Preventive-Corrective Control of Power Systems [Volume 19, Issue 2, 2001, Pages 31-46]
M. Shahrokhi, Design of a Model Based Compensator for Systems With Time Delays [Volume 10, Issue 1, 1991, Pages 61-86]
M. Shahrokhi, Design of a Model Based Compensator for MIMO Systems with Time Delays and Constrained Inputs [Volume 11, Issue 1, 1992, Pages 45-62]
M. Shahrokhi, Comparison of Conventional and ModelØ Based Controllers for Controlling a Batch Polymerization Reactor [Volume 13, Issue 1, 1993, Pages 1-19]
M. Shamanian, Tribological Behaviour of Fe-Al Intermetallic Compound Coated Carbon Tool Steel [Volume 16, Issue 2, 1998, Pages 81-93]
M. Shamanian, Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2003, Pages 145-158]
M. Shamanian, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
M. Shamanian and A. Saidi, Microstructural Effect on the Weldability of 25Cr-35Ni Cast Steel [Volume 24, Issue 1, 2005, Pages 327-336]
M. Sheikhan and M. E. Kalantari, Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
M. Sheikhi and H. Haji-Kazemi, A Theoretical Study of the Behavior of Reinforced Concrete Columns Strengthened by Steel Plates and Transverse Reinforcements [Volume 25, Issue 2, 2007, Pages 65-72]
M. Sheikhzadeh, Yarn Tension along Cone Winding using a Controlling Loop [Volume 26, Issue 1, 2007, Pages 323-328]
M. Sheikhzadeh, Modeling the Vertical Falling Life Chute [Volume 27, Issue 2, 2009, Pages 149-154]
M. Sheikh-Zeinoddin, Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite [Volume 27, Issue 2, 2009, Pages 213-226]
M.S. Hosseini, Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2009, Pages 123-137]
M. S. Marefat and A. Tahani, Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2004, Pages 73-81]
M.S. Marefat and M. Vafaei, Direct Probabilistic Design of Reinforced Concrete Flexural Sections Using Digital Simulation [Volume 18, Issue 2, 1999, Pages 171-177]
M Sobhani, A New Approach for QFT-type Robust Controller Design in Uncertain Multivariable Systems [Volume 18, Issue 1, 1999, Pages 161-169]
M. Sobhani and A. A. Tabesh, System Identification Based on Frequency Response Noisy Data [Volume 19, Issue 1, 2000, Pages 157-174]
M. S. Sadeghipour and R. Razmi, Turbulent Flow in 2-D Domains with Complex Geometry-Finite Elelment Method [Volume 17, Issue 1, 1998, Pages 109-120]
M. S. Saidi, The Solution of Three Dimensional Incompressible Potential Flow Through Rectangular Ducts [Volume 9, Issue 1, 1991, Pages 79-93]
M. S. Saidi and M. Saghafian, The Study of Kinematics and Dynamics of Oscillating Laminar Flow About a Cylinder [Volume 20, Issue 1, 2001, Pages 151-171]
M. Taeibi-Rahni, Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2006, Pages 171-191]
M. Taghavi Ghadikolaee and S. H. Amirshahi, A Comparison between CIECAM97s and its Revised Colour Appearance Models for Apearance Attributes of Fabrics [Volume 24, Issue 2, 2006, Pages 227-239]
M. T. Ahmadian and S.Sadeghi, Modeling and Analysis of Handling-Stability of Passenger Cars [Volume 19, Issue 1, 2000, Pages 143-155]
M.Tajrishy and A. Abrishamchi, Water Quality Zoning of Rivers by the Technique of Fuzzy Clustering Analysis [Volume 20, Issue 1, 2001, Pages 55-68]
M. Talebi, Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2007, Pages 131-149]
M. T. Kazemi, Estimation of Evolution of Relative Humidity Distribution for Concrete Slabs [Volume 18, Issue 1, 1999, Pages 81-88]
M. T. Sattari, Optimization of Water Distribution in the kalamarz Multi - Reservoir System, Mianeh Basin [Volume 21, Issue 2, 2003, Pages 197-209]
M. Vafaeian, A Study of Deficiencies in the Bearing Capacity Analysis [Volume 5, Issue 1, 1987, Pages 83-104]
M. Vafaeian, Mathematical Analysis of the Behavior of Soft Ground Against Tunnelling [Volume 8, Issue 1, 1990, Pages 5-29]
M. Vafaeian, An Algorithm for Finite Element Analysis of Tunnel Supports Based on the Winklerâs Theory [Volume 13, Issue 1, 1993, Pages 113-128]
M. Vafaeian, Evaluating the Soil Bearing Capacity Coefficients by Means of a Finite Element Program Based on Elasto - Plastic Mohr - Coulomb Behavior [Volume 22, Issue 1, 2003, Pages 75-90]
M. Vafaeian, The Pattern of Ground Deformations due to Circular Tunneling [Volume 22, Issue 2, 2004, Pages 83-102]
M. Vaziri, Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
M. Veis Karami, Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
M. Ziaeefar, Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
M. Ziyaeifar and M. Ghafory-Ashtiany, Mass Participation Factor in Defining Non-classical Range of Behavior for Mass Isolated Systems [Volume 24, Issue 2, 2006, Pages 29-49]
M. Zohouri and A. Khorrami, Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2003, Pages 111-123]
N
Naderi, Peyman Simulation of Tumor Growth and Division Under Chemical Driving Forces Using the Phase Field Method [Volume 44, Issue 2, 2025, Pages 105-126]
Naderi, R. Comparison between Isogeometric Analysis and Extended Finite Element Methods in Discontinuities Modeling and Stress Intensity Factor Calculation [Volume 35, Issue 1, 2016, Pages 83-109]
Naghavi, S.M. A Simplified Curved Boundary Condition in Stationary/Moving Boundaries for the Lattice Boltzmann Method [Volume 39, Issue 1, 2020, Pages 87-104]
Nahavandi, Nasim Robust Optimization Model for Project Scheduling Problem with Resource Constraints [Volume 44, Issue 2, 2025, Pages 127-149]
N.A. Hosseinzadeh, Shake Table Study of Soil-Structure Interaction Effects on Seismic Response of Adjacent Buildings [Volume 22, Issue 2, 2004, Pages 51-71]
Nahvi, H. Two Dimensional Complex Wavenumber Dispersion Analysis
using B-Spline Finite Elements Method [Volume 34, Issue 2, 2016, Pages 37-50]
Najar, Mohamad A Brief Overview of Interpolation Methods [Volume 43, Issue 1, 2024, Pages 69-101]
Najarzadeh, Leila A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
Namazi, Sh. Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM [Volume 41, Issue 1, 2022, Pages 135-154]
Nasehi, Pedram Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2024, Pages 109-128]
Nasr Azadani, َAli Phase-Field Modeling of Grain Growth Under Thermal Gradients in SLM Additive Manufacturing Process [Volume 44, Issue 1, 2025, Pages 133-151]
Nasr Esfahani, M. Extending the Exponential Basis Functions Meshless Method to Solve Singular Plate Problems [Volume 34, Issue 2, 2016, Pages 87-103]
Nasrollahi, Saeed Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
Nasrollahi Boroujeni, S. Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
Navabi, S. M. Scheduling Hemodialysis Patients with Patient Preferences [Volume 38, Issue 2, 2020, Pages 97-114]
Nejatbakhsh, Hossein Buckling analysis of orthotropic rectangular plates with adhesive connection by generalized differential quadrature method [Volume 43, Issue 2, 2024, Pages 29-49]
Nejati, M. Free Vibration of Functionally Graded Variable Thickness Carbon Nanotube Annular Plates [Volume 35, Issue 2, 2017, Pages 131-158]
Nemati, M. The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2022, Pages 109-126]
N. Fallah, Dynamic Analysis of Asymmetric Structures Supported by a Sliding Foundation [Volume 14, Issue 1, 1994, Pages 56-80]
Niazi, S. Application and Comparison of Different Lattice Boltzmann Methods
on Non-Uniform Meshes for Simulation of Micro Cavity and
Micro Channel Flow [Volume 34, Issue 1, 2015, Pages 97-118]
Nikpour, Ali Modeling Anisotropic Hyperelastic Behavior of Soft Tissues Using the Smoothed Particle Hydrodynamics Method [Volume 44, Issue 1, 2025, Pages 63-83]
Nili Ahmadabadi, M. Inverse Design of Airfoil using Elastic Surface Method in Viscous Subsonic and Transonic Flow [Volume 34, Issue 1, 2015, Pages 63-77]
Nili Ahmadabadi, Mahdi Parametric Study of the Thrust Augmentor of a Pulsejet Engine in a Low-Mach-Number Compressible Flow Regime Using Unsteady Numerical Simulation [Volume 44, Issue 2, 2025, Pages 189-224]
N.Najaf- Zadeh, Effects of Carbon on the Microstructure and Hot Deformation Behavior [Volume 15, Issue 1, 1994, Pages 57-82]
Noghrehabadi, A. A New Approach for Solving Heat and Mass Transfer Equations of Viscoelastic Nanofluids using Artificial Optimization Method [Volume 38, Issue 1, 2019, Pages 1-18]
Noormohammadi, N. Solution of Harmonic Problems with Weak Singularities Using Equilibrated Basis Functions in Finite Element Method [Volume 39, Issue 2, 2021, Pages 119-146]
Noormohammadi, N. Static Analysis of in-Plane Heterogeneous Laminated Composite Plates Using Equilibrated Basis Functions Based on FSDT [Volume 40, Issue 1, 2021, Pages 59-77]
Noormohammadi, Nima Scaled Boundary Finite Element Method Coupled with Equilibrated Basis Functions for Heat Transfer Problems [Volume 42, Issue 1, 2023, Pages 105-123]
Noroozi, Hamed Investigation of the effect of changing the type of fluid on the hydrodynamic and thermal characteristics of the flow in a thermal micro-heatsink [Volume 43, Issue 2, 2024, Pages 51-67]
Nouri, Hossein Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
Nouri and A. M. Lavasani, Heat Transfer from a Tube Bank in Cross Flow in a Duct [Volume 24, Issue 1, 2005, Pages 315-325]
N. Sadati, Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
N. Sadati and R. Mahin-Rousta, Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
N. Setoudeh, Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
N. Setoudeh, Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2009, Pages 155-164]
N. Talebbeydokhti and M. Nikmanesh, Development of a Computer Model for the Prediction of Littoral Sediment Transport Rate [Volume 20, Issue 2, 2001, Pages 77-91]
N. Tohidi, Short Article: Technology of Direct Reduction of Iron OresØ a New [Volume 12, Issue 1, 1993, Pages 95-104]
N. Zarrinfar and A. Saidi, Control Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper [Volume 21, Issue 2, 2003, Pages 125-132]
O
Omranpour, H. A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
O. R. Barani and M. Saadatpour, A New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature [Volume 23, Issue 1, 2004, Pages 95-122]
O.R. Keramati, Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
P
Panjebashi Naghsh, A. Statistical Analysis of Energy Harvesting From Functionally Graded Cantilever Beam with Piezoelectric Layer [Volume 40, Issue 2, 2022, Pages 95-108]
Panji, Mehdi A DR-BEM Model for a Half-Space Including the Cavity under Scalar Surface Pulse [Volume 43, Issue 2, 2024, Pages 69-82]
Parvizian, J. Two Dimensional Complex Wavenumber Dispersion Analysis
using B-Spline Finite Elements Method [Volume 34, Issue 2, 2016, Pages 37-50]
Parvizian, J. Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Pashaei, M. H. Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
Pedram, O. Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
Pirhaji Khouzani, Nazanin Scaled Boundary Finite Element Method Coupled with Equilibrated Basis Functions for Heat Transfer Problems [Volume 42, Issue 1, 2023, Pages 105-123]
Pishevar, Ahmadreza Simulation of Tumor Growth and Division Under Chemical Driving Forces Using the Phase Field Method [Volume 44, Issue 2, 2025, Pages 105-126]
Pourmoayed, Alireza Dynamic Stability Analysis of FGM Beams Based on the Nonlinear Timoshenko Model [Volume 42, Issue 1, 2023, Pages 63-76]
Poursaeidi, E. Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
R
Rabbani, A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
Rabbani, M. Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2017, Pages 65-84]
Rabbani, M. A Cyclical Integrated Production and Maintenance Systems Planning with Consideration of Identical Maintenance Periods [Volume 36, Issue 2, 2018, Pages 63-78]
Rabbani, M. Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2019, Pages 61-78]
Rabeti Moghadam, M. Effect of Underground Structure on PGA at Ground Surface Considering Linear and Nonlinear Behaviour for the Soil [Volume 34, Issue 1, 2015, Pages 119-137]
Rafatnia, S. Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2021, Pages 23-44]
Rafiei, H. Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2017, Pages 65-84]
Rafizadeh, A. Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Rahgozar, Mohammad Ali Vibration Analysis of Thick Sandwich Plates with Saturated
FG-Porous Core Using Quasi-3D Shear Deformation Theory [Volume 42, Issue 1, 2023, Pages 19-41]
Rahim Zolanwar, A Mathematical Model for the Estimation of Ghanats Water Storages. [Volume 8, Issue 1, 1990, Pages 61-101]
Rahmanian and M. Sajedi, Investigation of Submerged Vanes Array for Sediment Control at Intake Using a Physical Model [Volume 18, Issue 2, 1999, Pages 179-189]
Rahmani Firoozjaee, A. Numerical Simulation of 2D Sediment Transport Equations via Element Free Galerkin [Volume 36, Issue 2, 2018, Pages 139-154]
Rahmati, Ahmadreza Investigating the Effect of Changing the Shape of the Cross Section of an Elliptical Obstacle on the Deposition of Micro Particles Inside the Channel Using the Boltzmann Network Method [Volume 43, Issue 1, 2024, Pages 153-171]
Rahmati, Ahmad Reza Investigation of the effect of changing the type of fluid on the hydrodynamic and thermal characteristics of the flow in a thermal micro-heatsink [Volume 43, Issue 2, 2024, Pages 51-67]
Rahmati, AhmadReza Investigation and Analysis of Turbulence Models in Turbulent Flow in Tubular Thermal Economizers[Volume 45, Issue 1, 2026, Pages 91-115]
Rahmati, AhmadReza Thermodynamic-Environmental Assessment of ConvertingIran’s Gas Power Plants to Combined Cycle [Volume 45, Issue 1, 2026, Pages 151-180]
Rahmati, A. R. Application and Comparison of Different Lattice Boltzmann Methods
on Non-Uniform Meshes for Simulation of Micro Cavity and
Micro Channel Flow [Volume 34, Issue 1, 2015, Pages 97-118]
Rahmati, A. R. Numerical Study of Natural Convection Heat Transfer of Nanofluid in a Square Shaped Porous Media using Lattice Boltzmann Method [Volume 35, Issue 2, 2017, Pages 47-64]
Rahmati, A. R. Simulation of Deformation and Break-up of Droplets in the Presense of Electric Field in Porous Media Using Lattice Boltzmann Method [Volume 40, Issue 1, 2021, Pages 79-101]
Rahmati, A. R. Heat Transfer Enhancement of Al2O3âH2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method [Volume 40, Issue 2, 2022, Pages 1-18]
Rahmati, A. R. Investigation on the effect of magnetic field on forced convection heat transfer of liquid metals in a microchannel heat sink [Volume 42, Issue 2, 2024, Pages 149-166]
Rajabi, R. Numerical Study of Viscous Dissipation and Roughness Effects on Fluid Flow and Heat Transfer in Microchannels using Perturbation Method [Volume 35, Issue 1, 2016, Pages 143-156]
Rank, E. Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Rashki, M. Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2017, Pages 1-22]
Rashki, M. Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Rasmi, Mahdi Determination of convective velocity of eddies in turbulent channel flows using acoustic wave propagation [Volume 44, Issue 2, 2025, Pages 1-17]
Rastan, M. R. Numerical Simulation of Turbulent Half-corrugated Channel Flow by Hydrophilic and Hydrophobic Surfaces [Volume 36, Issue 2, 2018, Pages 1-20]
Rastegar Rajeouni, P. Simulation of Deformation and Break-up of Droplets in the Presense of Electric Field in Porous Media Using Lattice Boltzmann Method [Volume 40, Issue 1, 2021, Pages 79-101]
R. Azmi and E. Kabir, A New Segmentation Technique for Omnifont Farsi Text [Volume 18, Issue 2, 1999, Pages 1-10]
R. Bagheri, Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface [Volume 26, Issue 1, 2007, Pages 313-322]
R. Bagheri and M.A. Golozar, Mechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel [Volume 25, Issue 2, 2007, Pages 191-203]
R.B.Kazemzadeh, Economic Design of R2R Controller using EWMA Procedure [Volume 24, Issue 2, 2006, Pages 15-28]
Reisi-Nafchi, M. Scheduling Hemodialysis Patients with Patient Preferences [Volume 38, Issue 2, 2020, Pages 97-114]
Reisi-Nafchi, M. Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Rezaee, M. The Effect of Friction on the Nonlinear Vibration of the Cracked One-Stage Power Transmission [Volume 34, Issue 2, 2016, Pages 105-122]
Rezaee, M. Theoretical-experimental Determination of Nonlinear Crack Parameters in the Cracked Beam under Nonlinear Low Amplitude Vibration [Volume 36, Issue 1, 2017, Pages 85-98]
Rezaee, M. Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
Rezaei, Mohammad Javad Microstructure and texture investigation of commercial pure aluminium subjected to torsion deformation using crystal plasticity simulation [Volume 43, Issue 2, 2024, Pages 127-142]
Rezaei, sh Investigation of Piezoelectric Coupling and Anisotropy Effect on Acoustic Wave Propagation at LithiumNiobate Crystalloacoustic [Volume 36, Issue 1, 2017, Pages 149-159]
Rezaei Sameti, Amir Impression of Temperature and Oxide Layer Thickness on the Mechanical Characteristics of Aluminum ultra-thin film [Volume 43, Issue 1, 2024, Pages 103-118]
Rezamand, Ali Investigating the Effect of Bidirectional Functionally Graded Structure on the Mechanical Behavior of Bone and Fatigue Life of Dental Implants[Volume 45, Issue 1, 2026, Pages 53-72]
Rezanezhad, Mohammad Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2023, Pages 29-60]
R. Ghasemi Asl, Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects [Volume 26, Issue 1, 2007, Pages 197-207]
R. Hooshmand, Application of Fuzzy Linear Programming in Optimal Load Shedding and Generation Reallocation Problem [Volume 15, Issue 2, 1997, Pages 27-42]
R. Hosseini, Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
Riasatfard, Yousof Parametric Study of the Thrust Augmentor of a Pulsejet Engine in a Low-Mach-Number Compressible Flow Regime Using Unsteady Numerical Simulation [Volume 44, Issue 2, 2025, Pages 189-224]
R. Kazemi and B. Hamedi, Improving the Dynamic Performance of Passenger Cars via Rear Suspension Mechanism Modification [Volume 19, Issue 2, 2001, Pages 191-198]
R. Keypour, Genetic Algorithm- Based Active Power Filter Allocation and Size Determination [Volume 21, Issue 1, 2002, Pages 29-41]
R. Khoee, Application of the Boundary Element Method to two Dimensional Dynamic Problems of Saturated Porous Media [Volume 14, Issue 1, 1994, Pages 81-116]
R. Mirghaderi, Linear and Nonlinear Analysis of Cable Stayed Bridges By Fourier Series [Volume 7, Issue 1, 1989, Pages 61-90]
R. Mohammadi H. Torkaman, A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2009, Pages 1-17]
R. Mozaffarinia, The production of Ceramic Thin Films by Sol-Gel Method [Volume 22, Issue 2, 2004, Pages 189-200]
R. Naghdabadi and A. Saeedi, A Corotational Elastic Constitiutive Model and its Application to the Analysis of a Large Deformation Closed Cycle [Volume 23, Issue 1, 2004, Pages 147-161]
R.Noorossana and M. Karbasian, Economic Design of R2R Controller using EWMA Procedure [Volume 24, Issue 2, 2006, Pages 15-28]
Roshani, Babak Investigating the Effect of Changing the Shape of the Cross Section of an Elliptical Obstacle on the Deposition of Micro Particles Inside the Channel Using the Boltzmann Network Method [Volume 43, Issue 1, 2024, Pages 153-171]
Rostami, Javad Comparison of Homogenous and Buongiorno’ Model with Eulerian-Lagrangian Model for Nanofluids Heat Transfer in a Microchannel [Volume 41, Issue 2, 2023, Pages 101-116]
R. Roustaazad, The Transition Stage in the Start-up of an Anaerobic Sludge Digester [Volume 19, Issue 1, 2000, Pages 15-21]
R. Shateri, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
R. Taherian, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
R. Tavakkoli-Moghaddam, Minimizing Stoppage Cost of an Assembly Line Using Genetic Algorithm [Volume 27, Issue 1, 2008, Pages 35-50]
R. Tavakkoli-Moghaddam, A New Inventory Model for Deteriorating Items with Price-dependent Demand, Time-value of money, and Shortages [Volume 27, Issue 2, 2009, Pages 19-29]
S
Saadatdar Arani, S. A. Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Saadatpour, M. M. Modelling Wave Propagation in Thin Plates with the pectral Modal Method [Volume 37, Issue 1, 2018, Pages 51-64]
S. A.A. Mousavian, Near-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver [Volume 24, Issue 2, 2006, Pages 123-135]
S. A. Arefifar, Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Saatchi, Production of an Armor Steel Plate and the Study of its Mechanical and Ballistic Properties [Volume 14, Issue 1, 1994, Pages 37-55]
Sabooniha, Ehsan Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2023, Pages 117-136]
Sadeghi, M. Study on the Dynamic Response of Single and Multi-Spans Beam Subjected to the Base Excitation Using Time Weighted Residual Method [Volume 40, Issue 1, 2021, Pages 1-15]
Sadeghi, M. H. Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response [Volume 38, Issue 1, 2019, Pages 19-36]
Sadeghian, B. Thermal Simulation of Friction Stir Welding in 304 Stainless Steel to 5083 Aluminum Dissimilar Joint [Volume 36, Issue 2, 2018, Pages 101-117]
Sadeghirad, Alireza A novel technique for local mesh refinement in the finite element method based on the alternative shape functions [Volume 43, Issue 2, 2024, Pages 1-26]
Saeidi, D. Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2021, Pages 1-21]
Safaeian Hamzeh Kolaei, N. Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2017, Pages 1-22]
Safari, M. Inverse Design of Airfoil using Elastic Surface Method in Viscous Subsonic and Transonic Flow [Volume 34, Issue 1, 2015, Pages 63-77]
Safari Naderi, Mohammad Hadi A New Bond-Based Peridynamic Model with the Ability to Model Elastoplastic Behavior [Volume 42, Issue 1, 2023, Pages 125-139]
Safarnejad, M. Extending Lattice Discrete Particle Model of Concrete for Non-circular Aggregates [Volume 35, Issue 1, 2016, Pages 11-25]
S.A. Fazelzadeh Haghighi, Automatic Landing Guidance Systems and Design of an Optimal Landing Control System [Volume 18, Issue 1, 1999, Pages 113-125]
Saghafian, M. Numerical Study of Viscous Dissipation and Roughness Effects on Fluid Flow and Heat Transfer in Microchannels using Perturbation Method [Volume 35, Issue 1, 2016, Pages 143-156]
Saghafian, M. Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2021, Pages 1-21]
Sahebi,, Mahdi Numerical Simulation of the Flow on a flying boat Propeller in Different Working Conditions [Volume 45, Issue 1, 2026, Pages 203-226]
S. A. Hoseini, Measurement of Plain Weave Fabrics Density Using Fourier Transforms [Volume 16, Issue 2, 1998, Pages 63-70]
S. A. Hosseini, Colorimetric Scanner Calibration for Textiles by Neural-Network [Volume 22, Issue 2, 2004, Pages 215-224]
S. A. Hosseini, Estimation of Open-End Cotton Yarn Strenght from Fiber Physical Characteristics [Volume 23, Issue 1, 2004, Pages 203-209]
S.A. Hosseini Ravandi, Modeling the Vertical Falling Life Chute [Volume 27, Issue 2, 2009, Pages 149-154]
Saidi, Determination of Relationship between Autoignition of Sponge Iron and Specification of the Iron Ores [Volume 19, Issue 1, 2000, Pages 175-188]
Salamat Mamakani, R. Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2022, Pages 57-79]
Salari, M. An Improvement of Vermeer-de Borst Constitutive Model for Numerical Simulation of the Shear Behavior of Rockfills [Volume 36, Issue 2, 2018, Pages 49-62]
Salehi, A. M. Solution of Harmonic Problems with Weak Singularities Using Equilibrated Basis Functions in Finite Element Method [Volume 39, Issue 2, 2021, Pages 119-146]
Salehipour, H. Analytical and Numerical Study on the Buckling of Homogeneous Beams Coated by a Functionally Graded Porous Layer with Different Boundary Conditions [Volume 41, Issue 1, 2022, Pages 61-77]
Salehizadeh, A. M. Numerical Simulation of Granular Column Collapses with Pressure-Dependent Viscoplastic Model using the Smoothed Particle Hydrodynamic Method [Volume 38, Issue 2, 2020, Pages 23-41]
Salehizadeh, amir madood Smooth Particle Hydrodynamics Scheme for Numerical Simulation of Multiphase Flows With Complex Interface Surfaces [Volume 41, Issue 2, 2023, Pages 137-153]
Salmani Tehrani, Mehdi Impact of Calcified Plaque Material Properties on TAVI Performance: A Finite Element Analysis [Volume 44, Issue 2, 2025, Pages 79-104]
Salmani Tehrani, Mehdi Investigating the Effect of Bidirectional Functionally Graded Structure on the Mechanical Behavior of Bone and Fatigue Life of Dental Implants[Volume 45, Issue 1, 2026, Pages 53-72]
S. Aminorroaya and H. Edris, The Effect of Foamy Slag on Power Consumption in Electric Arc Furnaces [Volume 21, Issue 1, 2002, Pages 195-206]
S. Amiri and S. H. Amirshahi, A Comparison between Kubelka-Munk and Geometric Models for Prediction of Reflectance Factor of Transparent Fibers [Volume 26, Issue 2, 2008, Pages 31-45]
Saravani, S. Random - weighted Monte Carlo Simulation Method for Structural Reliability Analysis [Volume 37, Issue 2, 2019, Pages 41-60]
Sarrami, Saeed Nonlinear free vibration analysis of moderately thick sandwich plates with viscoelastic core using finite strip method [Volume 43, Issue 1, 2024, Pages 119-135]
Sarrami-Foroushani, S. Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2020, Pages 43-61]
Sasan Azadi, Application of a Direct Model Reference Adaptive Controller (DMRAC) in a Nonlinear Cardiovascular Model [Volume 22, Issue 2, 2004, Pages 35-49]
S.A. Shojaosadati, Optimization of Single Cell Protein Production from Cheese Whey Under Batch and Continuous Cultivation [Volume 18, Issue 1, 1999, Pages 33-42]
S. A. Shojaosadati and A. Seifi, The Performance of Compost Biofilter for Hydrogen Sulfide Removal from Contaminated Air [Volume 20, Issue 1, 2001, Pages 43-53]
S.A. Tabatabaei, Effect of Failure Criteria on Stress and Strain Analysis of Asphalt Pavement in Tropical Areas [Volume 27, Issue 1, 2008, Pages 143-150]
S. A. Taher, H&infin Controller Design for Static VAR Compensators in Industrial Networks [Volume 17, Issue 2, 1998, Pages 169-177]
S. Banisi, Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
SB. Moosavi, The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
S.B. Zahir Azami, Speaker Independent Speech Recognition Using Hidden Markov Models for Persian Isolated Words [Volume 13, Issue 1, 1993, Pages 21-45]
S.Dilmaghani and F. Zainalli, Effect of Use of Granulated Slag Instead of Portland Cement on the Properties of Concrete [Volume 17, Issue 2, 1998, Pages 57-67]
Sedighi, Mohammad Microstructure and texture investigation of commercial pure aluminium subjected to torsion deformation using crystal plasticity simulation [Volume 43, Issue 2, 2024, Pages 127-142]
Sefid, M. The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2022, Pages 109-126]
Seid H. Pourtakdoust, Automatic Landing Guidance Systems and Design of an Optimal Landing Control System [Volume 18, Issue 1, 1999, Pages 113-125]
Seifi, R. Buckling of Cracked Panels under Axial Compressive and Tensile Loading [Volume 34, Issue 1, 2015, Pages 155-164]
Seyedi Hosseininia, E. Discrete Element Method for Modeling the Mechanical Behavior of Unsaturated Granular Material [Volume 35, Issue 1, 2016, Pages 157-181]
Seyed Sharafy, S. M. Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2019, Pages 113-138]
Seyyed Jalal Hemmati, Thermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method [Volume 24, Issue 2, 2006, Pages 159-170]
S. Farahani and A. Assempour, Optimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections [Volume 26, Issue 1, 2007, Pages 285-299]
S. Feiz and S. Hemati, Dispersion Evaluation In Optical Wave Guides [Volume 18, Issue 1, 1999, Pages 23-31]
S. Gazor and A. M. Doosthoseini, Windowing Effects of Short Time Fourier Transform on Wideband Array Signal Processing Using Maximum Likelihood Estimation [Volume 17, Issue 2, 1998, Pages 29-42]
S. Gh. Etemad, Forced Convection Heat Transfer of Non-Newtonian Fluids Through Circular Ducts [Volume 17, Issue 1, 1998, Pages 1-12]
S. GH. Etemad and F. Bakhtiari, Selection of Suitable Geometry in Compact Heat Exchanger Design [Volume 18, Issue 2, 1999, Pages 61-75]
S. Golabi, Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2008, Pages 1-16]
Shabani, F. Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2021, Pages 1-21]
Shadpour, Mohammad Simulation of Strain-Induced Grain Boundary Migration via Coupling Phase-Field and Crystal Plasticity Methods: Effect of Representative Volume Element Size [Volume 45, Issue 1, 2026, Pages 131-149]
Shafiei, A. Numerical Simulation of Granular Column Collapses with Pressure-Dependent Viscoplastic Model using the Smoothed Particle Hydrodynamic Method [Volume 38, Issue 2, 2020, Pages 23-41]
Shafiei, Z. Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2020, Pages 43-61]
Shahabian, Farzad Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2024, Pages 87-108]
Shahabian, Farzad An efficient method for applying distributed loads on curved surfaces in isogeometric analysis [Volume 43, Issue 2, 2024, Pages 107-125]
Shahabian, Farzad Buckling Analysis of Graphene Platelet-Reinforced Functionally Graded Nanoplates Resting on Elastic Foundation Using a Meshfree Formulation Based on Nonlocal Strain-Gradient Theory[Volume 45, Issue 1, 2026, Pages 25-51]
Shahbeyk, S. Extending Lattice Discrete Particle Model of Concrete for Non-circular Aggregates [Volume 35, Issue 1, 2016, Pages 11-25]
Shahriary, P. Studying the Effect of Fillet on Fretting Fatigue Strength in the Press-Fitted Axle Assembly using Different Multiaxial Fatigue Criteria and Fretting Fatigue Damage Darameter [Volume 34, Issue 2, 2016, Pages 159-175]
Shakeri, K. Optimal Tuned Mass Damper for Nonlinear Structure under
Different Earthquakes [Volume 34, Issue 1, 2015, Pages 45-62]
Shakerin, Hamid Rolling Contact Fatigue Analysis of Bearings in the Presence of Oil Lubrication Considering the Effect of Pitting[Volume 45, Issue 1, 2026, Pages 181-201]
S. H. Amirshahi, Using Pseudo-Inverse to Eliminate the Limitation of the Number of Colors in Colorimetric Match [Volume 14, Issue 2, 1996, Pages 13-20]
S. H. Amirshahi and M. Latefi, Using the Geometric Model to Explain the Longitudinal and CrossâSectional Reflection Behaviors of Acrylic yarns [Volume 21, Issue 2, 2003, Pages 167-180]
Sharifi, Navid Numerical simulation of supersonic natural gas flow passing through a Laval nozzle to assess the possibility of Dehumidification [Volume 44, Issue 1, 2025, Pages 85-102]
S. Hatami, Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
S. Hatefi-Pour and A.A. Ahangar, Study on Reduction of Energy Consumption of Household Refrigerators-Freezers [Volume 16, Issue 2, 1998, Pages 29-38]
Shayani-jam, H. Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
Sheikhbahaei, P. A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Sheikhbahaei, Pouria A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2023, Pages 1-28]
Sheikhzadeh, G.A. A Simplified Curved Boundary Condition in Stationary/Moving Boundaries for the Lattice Boltzmann Method [Volume 39, Issue 1, 2020, Pages 87-104]
S. H. Hosseini, A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
Shirani, E. Inverse Design of Airfoil using Elastic Surface Method in Viscous Subsonic and Transonic Flow [Volume 34, Issue 1, 2015, Pages 63-77]
Shirmohammadi, F. Modelling Wave Propagation in Thin Plates with the pectral Modal Method [Volume 37, Issue 1, 2018, Pages 51-64]
S. H. Mansouri, Two-Dimensional Boundary-Conforming Orthogonal Grids for External and Internal Flows Using Schwarz-Christoffel Transformation [Volume 16, Issue 1, 1997, Pages 19-29]
Shojaiefard, Mohammad Hossein Two-dimensional micromechanical analysis of fracture in human cortical bone tissue using the phase-field method [Volume 43, Issue 2, 2024, Pages 143-161]
S. Hossain-Pour and M. Farschi, Determination of BKW Equation of State Parameters via Measurement of the Detonation Velocity in Condensed Explosives [Volume 17, Issue 2, 1998, Pages 97-108]
Sh. Samavi and R. Kelishadi, Computation of Trigonometric Functions by the Systolic Implementation of the CORDIC Algorithm [Volume 20, Issue 1, 2001, Pages 1-11]
Sh. Tavousi, Mass Participation Factor in Defining Non-classical Range of Behavior for Mass Isolated Systems [Volume 24, Issue 2, 2006, Pages 29-49]
Sh. Toobaie and H. Z. Aashtiani, Methods of Reducing the Number of Effective ODs in Order to Solve Traffic Equilibrium Problem in Real Life Networks [Volume 20, Issue 1, 2001, Pages 97-111]
Silani, Mohammad Thermomechanical and microstructural simulation of rotary friction welding process of Inconel718 alloy using the finite element method [Volume 42, Issue 2, 2024, Pages 129-147]
Silani, Mohammad Two-dimensional micromechanical analysis of fracture in human cortical bone tissue using the phase-field method [Volume 43, Issue 2, 2024, Pages 143-161]
S. Jani, Mathematical Modelling of Pulmonary Edema [Volume 18, Issue 1, 1999, Pages 127-142]
S. Ketabi, Network Optimization with Concave Costs [Volume 20, Issue 1, 2001, Pages 127-135]
S. Mahzooni, Internal Forces in Piles âUnder External Forces and Earthquake in Homogeneous and Nonhomogeneous Mediaâ [Volume 12, Issue 1, 1993, Pages 21-48]
S. M. Etrati and A. H. Sadri, Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform [Volume 23, Issue 1, 2004, Pages 221-227]
S. M. Haeri, Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
S.M.H Mirbagheri, Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2009, Pages 183-198]
S. M. Hosseini and E. Sonei, Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
S. M. Hosseini Sarvari, Two-Dimensional Boundary-Conforming Orthogonal Grids for External and Internal Flows Using Schwarz-Christoffel Transformation [Volume 16, Issue 1, 1997, Pages 19-29]
S. Mirzaei, Design and Construction of an Electromagetic Supension System for Vehicles [Volume 20, Issue 2, 2001, Pages 1-16]
S. M. Miresmaeili and S. Shabestari, Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys [Volume 25, Issue 1, 2006, Pages 189-206]
S. M. Mortazavi and M. Sedighipoor, Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
S. Monajem, Square Joints in Railway Track Waves [Volume 24, Issue 1, 2005, Pages 197-211]
S. Mortazavi, Analytical Determination of the Nusselt Number in the Entrance Region [Volume 5, Issue 1, 1987, Pages 45-81]
S. Mortazavi, A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2007, Pages 113-129]
S. M. R. Khalili, Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2003, Pages 111-123]
S.M. Saghaian and F.Farahmand, Steady-State Performance Characteristics of Photovoltaic System Coupled with a Centrifugal Water Pump [Volume 15, Issue 2, 1997, Pages 75-86]
S. M. T. Fatemi Ghomi, A special Class of Stochastic PERT Networks [Volume 18, Issue 1, 1999, Pages 43-59]
S. M. Zahrai and B. Rad, Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2007, Pages 51-64]
Sohrabi-Bidar, Abdollah Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2023, Pages 61-82]
Soltani, B. Analysis of Thin Isotropic and Orthotropic Plates with Element-Free Galerkin Method and Various Geometric Shapes [Volume 34, Issue 2, 2016, Pages 143-157]
Soltani, M. Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
S. Rahimi Bandarabadi, The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
S. R. Bakhsi, The Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers [Volume 17, Issue 2, 1998, Pages 155-168]
S. R. Hejazi, Simulated Annealing Approach for Solving Bilevel Programming Problem [Volume 19, Issue 2, 2001, Pages 65-78]
S. R. Motahari and M.M. Tavasoulkhamseh, Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype [Volume 23, Issue 2, 2005, Pages 25-38]
S. Roushanbin, Effects of Support Conditions on Dynamic Behaviour and Seismic Response of Ghadir Bridge [Volume 24, Issue 1, 2005, Pages 177-196]
S. Sadri, Windowing Effects of Short Time Fourier Transform on Wideband Array Signal Processing Using Maximum Likelihood Estimation [Volume 17, Issue 2, 1998, Pages 29-42]
S. Samavi, Optimized Standard Cell Generation for Static CMOS Technology [Volume 21, Issue 2, 2003, Pages 15-27]
S.Samavi, Performance Analysis of a New Neural Network for Routing in Mesh Interconnection Networks [Volume 20, Issue 2, 2001, Pages 17-25]
S. S. Eslamian and A. Abrishamchi, Optimization of Water Distribution in the kalamarz Multi - Reservoir System, Mianeh Basin [Volume 21, Issue 2, 2003, Pages 197-209]
S. S. Eslmian, Application of Discriminant Analysis to Estimate Instantaneous Maximum Discharge for Catchments in West of Iran [Volume 19, Issue 2, 2001, Pages 179-190]
S. Sharifian and S. M. Ahadi, Speaker Adaptation in Continuous Speech Recognition Using MLLR-Based MAP Estimation [Volume 23, Issue 2, 2005, Pages 39-50]
S. Shekarian, Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2009, Pages 139-148]
S. Sookhtehsaraee, Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2009, Pages 183-198]
S. Talebi and A.A. Rostami, Thermodynamic Analysis of Refrigerators Using Different Refrigerants [Volume 14, Issue 1, 1994, Pages 31-39]
S. Vahabzadeh, Annealing Effects on Microstructure and Microwave Properties of CuO-Doped (Zr0.8Sn0.2)TiO4 [Volume 27, Issue 2, 2009, Pages 199-211]
S. Yaghmaei, Mathematical Modeling of Contaminated Soil Bioremediation Bases on Convection Dispersion Phenomena [Volume 21, Issue 1, 2002, Pages 43-56]
S. Ziaei-Rad, Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations [Volume 25, Issue 2, 2007, Pages 151-165]
S. Z. Shafaie, Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
T
Tabashiri Esfahani, Roya Evaluation of Signal Processing and Deep Learning Methods for Inter-Beat Interval Extraction from Ballistocardiography Signals [Volume 44, Issue 2, 2025, Pages 49-61]
Taebi, Amirtaha Evaluation of Signal Processing and Deep Learning Methods for Inter-Beat Interval Extraction from Ballistocardiography Signals [Volume 44, Issue 2, 2025, Pages 49-61]
Taghiloo, R. Low Velocity Impact Damage Prediction in Laminated Composite Plates [Volume 38, Issue 1, 2019, Pages 37-62]
Taghiniam, F. Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2017, Pages 65-84]
Taghipour, Aliakbar Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Taghizade Manzari, Mehrdad Determination of convective velocity of eddies in turbulent channel flows using acoustic wave propagation [Volume 44, Issue 2, 2025, Pages 1-17]
Taheri-Behrooz, F. Strength Prediction of Woven Composite Rings using Progressive Damage Analysis [Volume 37, Issue 2, 2019, Pages 17-39]
Taherizadeh, Aboozar Thermomechanical and microstructural simulation of rotary friction welding process of Inconel718 alloy using the finite element method [Volume 42, Issue 2, 2024, Pages 129-147]
Taherizadeh, Aboozar Evaluation of the Creep Behavior of HP35Nb Heat Resistant Steel Using Finite Element Method [Volume 44, Issue 2, 2025, Pages 63-78]
Tajmir Riahi, Hossein A review of wavelet theory and its applications in structural and earthquake engineering [Volume 43, Issue 1, 2024, Pages 1-40]
Taki, Mohammad Sina Investigation of the static stable states of a bistable composite rectangular plate with curved fibers and piezoelectric layers [Volume 44, Issue 1, 2025, Pages 21-41]
Taki, M. S Control of Nonlinear Vibration in Bi-Stable Composite Plates using Fuzzy Logic [Volume 34, Issue 2, 2016, Pages 123-142]
Talebitooti, Mostafa Nonlinear Vibrations of Functionally Graded Graphene Reinforced Composite Cylindrical Shells Using the Multiple Scale Method [Volume 44, Issue 1, 2025, Pages 1-19]
Talkhabi, S. A New Recursive Formulation for the Mixed Redundancy Strategy in Reliability Optimization Problems [Volume 39, Issue 2, 2021, Pages 45-58]
Tanzadeh, H. Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
Tavanaei Far, H. In-plane Failure Analysis of URM Structures Based on Strain Hardening and Softening in the Multilaminate Framework [Volume 34, Issue 2, 2016, Pages 51-71]
Tayefi, Seyed Amir Numerical simulation of supersonic natural gas flow passing through a Laval nozzle to assess the possibility of Dehumidification [Volume 44, Issue 1, 2025, Pages 85-102]
T. Ghafarian, Parallel Genetic Algorithm Using Algorithmic Skeleton [Volume 22, Issue 2, 2004, Pages 1-19]
Tikani, Reza Investigation of the static stable states of a bistable composite rectangular plate with curved fibers and piezoelectric layers [Volume 44, Issue 1, 2025, Pages 21-41]
T. Mousavi, Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2008, Pages 59-70]
Tohidi, Sajjad Buckling Analysis of Graphene Platelet-Reinforced Functionally Graded Nanoplates Resting on Elastic Foundation Using a Meshfree Formulation Based on Nonlocal Strain-Gradient Theory[Volume 45, Issue 1, 2026, Pages 25-51]
Toluei, Reza Modeling Simple Shear Deformation in Hyperelastoplasticity: A Numerical Integration Algorithm in the Intermediate Configuration [Volume 43, Issue 1, 2024, Pages 137-152]
Torbat, Sh. A Hybrid Intelligent Classification Model Based on Multilayer Perceptron Neural Networks and Fuzzy Regression for Credit Scoring Problems [Volume 37, Issue 2, 2019, Pages 97-111]
Torfeh, S. Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Tourani, K. Discrete Element Method for Modeling the Mechanical Behavior of Unsaturated Granular Material [Volume 35, Issue 1, 2016, Pages 157-181]
T. Shahrabi Farahani, Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
V
V. Baigi and S. A. Lajevardi, Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
V. Kalantar and M. Abbaspour, Simulation of Dispersion of Polluted Gases in Atmosphere [Volume 14, Issue 2, 1996, Pages 21-41]
V. Mokarizadeh, Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2007, Pages 167-181]
V. Mortazavi, Corrosion Behavior of Dental Amalgams, in Vitro Tests [Volume 15, Issue 1, 1994, Pages 45-55]
V. Tabatabaee, Speaker Independent Speech Recognition Using Hidden Markov Models for Persian Isolated Words [Volume 13, Issue 1, 1993, Pages 21-45]
V. Tahani, Fuzzy Logic Control of a Switched Reluctance Motor [Volume 21, Issue 1, 2002, Pages 15-27]
V. Tahani and Caro Lucas, A New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control [Volume 20, Issue 1, 2001, Pages 29-42]
V. Tahani and M. Moallem, Design and Construction of an Electromagetic Supension System for Vehicles [Volume 20, Issue 2, 2001, Pages 1-16]
V. Tahani and P. Khadivi, Performance Analysis of a New Neural Network for Routing in Mesh Interconnection Networks [Volume 20, Issue 2, 2001, Pages 17-25]
Y
Yari, E. Free and Forced Vibrations of a Shaft and Propeller Using the Couple of Finite Volume Method, Boundary Element Method
and Finite Element Method [Volume 34, Issue 2, 2016, Pages 13-36]
Yas, M. H. Free Vibration of Functionally Graded Variable Thickness Carbon Nanotube Annular Plates [Volume 35, Issue 2, 2017, Pages 131-158]
Yousefi, Amir Hossein Free Vibration Analysis of Polymer/Graphene Nanoplatelet/Fiber Truncated Conical Shells Embedded in an Elastic Foundation [Volume 42, Issue 2, 2024, Pages 69-86]
Y. Zakeri, Design Algorithms for Doppler MTI and Filters (Using Chebyshev Approximation) [Volume 9, Issue 1, 1991, Pages 95-125]
Z
Z. Ahangari Sisi, Z. Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2021, Pages 23-44]
Zamani, Ali Vibration Analysis of Thick Sandwich Plates with Saturated
FG-Porous Core Using Quasi-3D Shear Deformation Theory [Volume 42, Issue 1, 2023, Pages 19-41]
Zamani Nouri, A. Analysis of the Effect of Fluid Velocity on the Instability of Concrete Pipes Reinforced with Nanoparticles Conveying the Fluid Flow [Volume 38, Issue 2, 2020, Pages 63-81]
Zandi, Mahdi A review of wavelet theory and its applications in structural and earthquake engineering [Volume 43, Issue 1, 2024, Pages 1-40]
Zandi, S. M. Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Zardashti, R. Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Zareei, Neda Numerical simulation of supersonic natural gas flow passing through a Laval nozzle to assess the possibility of Dehumidification [Volume 44, Issue 1, 2025, Pages 85-102]
Zare Hosseinzadeh, A. Damage Identification in Shear Frames via Grey Relation Theory and Static Displacement Estimated by Limited Modal Data [Volume 34, Issue 1, 2015, Pages 139-154]
Zehsaz, M. Studying the Effect of Fillet on Fretting Fatigue Strength in the Press-Fitted Axle Assembly using Different Multiaxial Fatigue Criteria and Fretting Fatigue Damage Darameter [Volume 34, Issue 2, 2016, Pages 159-175]
Zeighami, V. Buckling Analysis of Functionally Graded Carbon Nanotube-reinforced Composite Plates using Incremental Loading and Dynamic Relaxation Methods [Volume 35, Issue 1, 2016, Pages 43-63]
Z. Ghassemi and H. Moghbeli, Design and Realization of an Improved De-Q-ing Circuit for Regulation of Modulator Output Pulse Amplitudes in a Radar Transmitter [Volume 18, Issue 2, 1999, Pages 19-31]
Ziaei-Rad, S. Control of Nonlinear Vibration in Bi-Stable Composite Plates using Fuzzy Logic [Volume 34, Issue 2, 2016, Pages 123-142]
Ziaei-Rad, S. Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2019, Pages 1-15]
Zohali, H. New Mathematical Model and Algorithm for Economic Lot Scheduling Problem in Flexible Flow Shop [Volume 36, Issue 2, 2018, Pages 119-138]
